| // Copyright 2013 The Chromium Authors |
| // Use of this source code is governed by a BSD-style license that can be |
| // found in the LICENSE file. |
| |
| #include <limits.h> |
| |
| #include "polyfills/base/check.h" |
| #include "polyfills/base/check_op.h" |
| #include "absl/types/optional.h" |
| #include "url/url_canon.h" |
| #include "url/url_canon_internal.h" |
| #include "url/url_parse_internal.h" |
| |
| namespace url { |
| |
| namespace { |
| |
| enum CharacterFlags { |
| // Pass through unchanged, whether escaped or unescaped. This doesn't |
| // actually set anything so you can't OR it to check, it's just to make the |
| // table below more clear when neither ESCAPE or UNESCAPE is set. |
| PASS = 0, |
| |
| // This character requires special handling in DoPartialPathInternal. Doing |
| // this test |
| // first allows us to filter out the common cases of regular characters that |
| // can be directly copied. |
| SPECIAL = 1, |
| |
| // This character must be escaped in the canonical output. Note that all |
| // escaped chars also have the "special" bit set so that the code that looks |
| // for this is triggered. Not valid with PASS or ESCAPE |
| ESCAPE_BIT = 2, |
| ESCAPE = ESCAPE_BIT | SPECIAL, |
| |
| // This character must be unescaped in canonical output. Not valid with |
| // ESCAPE or PASS. We DON'T set the SPECIAL flag since if we encounter these |
| // characters unescaped, they should just be copied. |
| UNESCAPE = 4, |
| |
| // This character is disallowed in URLs. Note that the "special" bit is also |
| // set to trigger handling. |
| INVALID_BIT = 8, |
| INVALID = INVALID_BIT | SPECIAL, |
| }; |
| |
| // This table contains one of the above flag values. Note some flags are more |
| // than one bits because they also turn on the "special" flag. Special is the |
| // only flag that may be combined with others. |
| // |
| // This table is designed to match exactly what IE does with the characters. |
| // |
| // Dot is even more special, and the escaped version is handled specially by |
| // IsDot. Therefore, we don't need the "escape" flag, and even the "unescape" |
| // bit is never handled (we just need the "special") bit. |
| const unsigned char kPathCharLookup[0x100] = { |
| // NULL control chars... |
| INVALID, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, |
| // control chars... |
| ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, |
| // ' ' ! " # $ % & ' ( ) * + , - . / |
| ESCAPE, PASS, ESCAPE, ESCAPE, PASS, ESCAPE, PASS, PASS, PASS, PASS, PASS, PASS, PASS, UNESCAPE,SPECIAL, PASS, |
| // 0 1 2 3 4 5 6 7 8 9 : ; < = > ? |
| UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,PASS, PASS, ESCAPE, PASS, ESCAPE, ESCAPE, |
| // @ A B C D E F G H I J K L M N O |
| PASS, UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE, |
| // P Q R S T U V W X Y Z [ \ ] ^ _ |
| UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,PASS, ESCAPE, PASS, ESCAPE, UNESCAPE, |
| // ` a b c d e f g h i j k l m n o |
| ESCAPE, UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE, |
| // p q r s t u v w x y z { | } ~ <NBSP> |
| UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,UNESCAPE,ESCAPE, ESCAPE, ESCAPE, UNESCAPE,ESCAPE, |
| // ...all the high-bit characters are escaped |
| ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, |
| ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, |
| ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, |
| ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, |
| ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, |
| ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, |
| ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, |
| ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE, ESCAPE}; |
| |
| enum DotDisposition { |
| // The given dot is just part of a filename and is not special. |
| NOT_A_DIRECTORY, |
| |
| // The given dot is the current directory. |
| DIRECTORY_CUR, |
| |
| // The given dot is the first of a double dot that should take us up one. |
| DIRECTORY_UP |
| }; |
| |
| // When the path resolver finds a dot, this function is called with the |
| // character following that dot to see what it is. The return value |
| // indicates what type this dot is (see above). This code handles the case |
| // where the dot is at the end of the input. |
| // |
| // |*consumed_len| will contain the number of characters in the input that |
| // express what we found. |
| // |
| // If the input is "../foo", |after_dot| = 1, |end| = 6, and |
| // at the end, |*consumed_len| = 2 for the "./" this function consumed. The |
| // original dot length should be handled by the caller. |
| template <typename CHAR> |
| DotDisposition ClassifyAfterDot(const CHAR* spec, |
| size_t after_dot, |
| size_t end, |
| size_t* consumed_len) { |
| if (after_dot == end) { |
| // Single dot at the end. |
| *consumed_len = 0; |
| return DIRECTORY_CUR; |
| } |
| if (IsURLSlash(spec[after_dot])) { |
| // Single dot followed by a slash. |
| *consumed_len = 1; // Consume the slash |
| return DIRECTORY_CUR; |
| } |
| |
| size_t second_dot_len = IsDot(spec, after_dot, end); |
| if (second_dot_len) { |
| size_t after_second_dot = after_dot + second_dot_len; |
| if (after_second_dot == end) { |
| // Double dot at the end. |
| *consumed_len = second_dot_len; |
| return DIRECTORY_UP; |
| } |
| if (IsURLSlash(spec[after_second_dot])) { |
| // Double dot followed by a slash. |
| *consumed_len = second_dot_len + 1; |
| return DIRECTORY_UP; |
| } |
| } |
| |
| // The dots are followed by something else, not a directory. |
| *consumed_len = 0; |
| return NOT_A_DIRECTORY; |
| } |
| |
| // Rewinds the output to the previous slash. It is assumed that the output |
| // ends with a slash and this doesn't count (we call this when we are |
| // appending directory paths, so the previous path component has and ending |
| // slash). |
| // |
| // This will stop at the first slash (assumed to be at position |
| // |path_begin_in_output| and not go any higher than that. Some web pages |
| // do ".." too many times, so we need to handle that brokenness. |
| // |
| // It searches for a literal slash rather than including a backslash as well |
| // because it is run only on the canonical output. |
| // |
| // The output is guaranteed to end in a slash when this function completes. |
| void BackUpToPreviousSlash(size_t path_begin_in_output, CanonOutput* output) { |
| GURL_CHECK(output->length() > 0); |
| GURL_CHECK(path_begin_in_output < output->length()); |
| |
| size_t i = output->length() - 1; |
| GURL_DCHECK(output->at(i) == '/'); |
| if (i == path_begin_in_output) |
| return; // We're at the first slash, nothing to do. |
| |
| // Now back up (skipping the trailing slash) until we find another slash. |
| do { |
| --i; |
| } while (output->at(i) != '/' && i > path_begin_in_output); |
| |
| // Now shrink the output to just include that last slash we found. |
| output->set_length(i + 1); |
| } |
| |
| // Looks for problematic nested escape sequences and escapes the output as |
| // needed to ensure they can't be misinterpreted. |
| // |
| // Our concern is that in input escape sequence that's invalid because it |
| // contains nested escape sequences might look valid once those are unescaped. |
| // For example, "%%300" is not a valid escape sequence, but after unescaping the |
| // inner "%30" this becomes "%00" which is valid. Leaving this in the output |
| // string can result in callers re-canonicalizing the string and unescaping this |
| // sequence, thus resulting in something fundamentally different than the |
| // original input here. This can cause a variety of problems. |
| // |
| // This function is called after we've just unescaped a sequence that's within |
| // two output characters of a previous '%' that we know didn't begin a valid |
| // escape sequence in the input string. We look for whether the output is going |
| // to turn into a valid escape sequence, and if so, convert the initial '%' into |
| // an escaped "%25" so the output can't be misinterpreted. |
| // |
| // |spec| is the input string we're canonicalizing. |
| // |next_input_index| is the index of the next unprocessed character in |spec|. |
| // |input_len| is the length of |spec|. |
| // |last_invalid_percent_index| is the index in |output| of a previously-seen |
| // '%' character. The caller knows this '%' character isn't followed by a valid |
| // escape sequence in the input string. |
| // |output| is the canonicalized output thus far. The caller guarantees this |
| // ends with a '%' followed by one or two characters, and the '%' is the one |
| // pointed to by |last_invalid_percent_index|. The last character in the string |
| // was just unescaped. |
| template <typename CHAR> |
| void CheckForNestedEscapes(const CHAR* spec, |
| size_t next_input_index, |
| size_t input_len, |
| size_t last_invalid_percent_index, |
| CanonOutput* output) { |
| const size_t length = output->length(); |
| const char last_unescaped_char = output->at(length - 1); |
| |
| // If |output| currently looks like "%c", we need to try appending the next |
| // input character to see if this will result in a problematic escape |
| // sequence. Note that this won't trigger on the first nested escape of a |
| // two-escape sequence like "%%30%30" -- we'll allow the conversion to |
| // "%0%30" -- but the second nested escape will be caught by this function |
| // when it's called again in that case. |
| const bool append_next_char = last_invalid_percent_index == length - 2; |
| if (append_next_char) { |
| // If the input doesn't contain a 7-bit character next, this case won't be a |
| // problem. |
| if ((next_input_index == input_len) || (spec[next_input_index] >= 0x80)) |
| return; |
| output->push_back(static_cast<char>(spec[next_input_index])); |
| } |
| |
| // Now output ends like "%cc". Try to unescape this. |
| size_t begin = last_invalid_percent_index; |
| unsigned char temp; |
| if (DecodeEscaped(output->data(), &begin, output->length(), &temp)) { |
| // New escape sequence found. Overwrite the characters following the '%' |
| // with "25", and push_back() the one or two characters that were following |
| // the '%' when we were called. |
| if (!append_next_char) |
| output->push_back(output->at(last_invalid_percent_index + 1)); |
| output->set(last_invalid_percent_index + 1, '2'); |
| output->set(last_invalid_percent_index + 2, '5'); |
| output->push_back(last_unescaped_char); |
| } else if (append_next_char) { |
| // Not a valid escape sequence, but we still need to undo appending the next |
| // source character so the caller can process it normally. |
| output->set_length(length); |
| } |
| } |
| |
| // Canonicalizes and appends the given path to the output. It assumes that if |
| // the input path starts with a slash, it should be copied to the output. |
| // |
| // If there are already path components (this mode is used when appending |
| // relative paths for resolving), it assumes that the output already has |
| // a trailing slash and that if the input begins with a slash, it should be |
| // copied to the output. |
| // |
| // We do not collapse multiple slashes in a row to a single slash. It seems |
| // no web browsers do this, and we don't want incompatibilities, even though |
| // it would be correct for most systems. |
| template <typename CHAR, typename UCHAR> |
| bool DoPartialPathInternal(const CHAR* spec, |
| const Component& path, |
| size_t path_begin_in_output, |
| CanonOutput* output) { |
| if (!path.is_nonempty()) |
| return true; |
| |
| size_t end = static_cast<size_t>(path.end()); |
| |
| // We use this variable to minimize the amount of work done when unescaping -- |
| // we'll only call CheckForNestedEscapes() when this points at one of the last |
| // couple of characters in |output|. |
| absl::optional<size_t> last_invalid_percent_index; |
| |
| bool success = true; |
| for (size_t i = static_cast<size_t>(path.begin); i < end; i++) { |
| UCHAR uch = static_cast<UCHAR>(spec[i]); |
| if (sizeof(CHAR) > 1 && uch >= 0x80) { |
| // We only need to test wide input for having non-ASCII characters. For |
| // narrow input, we'll always just use the lookup table. We don't try to |
| // do anything tricky with decoding/validating UTF-8. This function will |
| // read one or two UTF-16 characters and append the output as UTF-8. This |
| // call will be removed in 8-bit mode. |
| success &= AppendUTF8EscapedChar(spec, &i, end, output); |
| } else { |
| // Normal ASCII character or 8-bit input, use the lookup table. |
| unsigned char out_ch = static_cast<unsigned char>(uch); |
| unsigned char flags = kPathCharLookup[out_ch]; |
| if (flags & SPECIAL) { |
| // Needs special handling of some sort. |
| size_t dotlen; |
| if ((dotlen = IsDot(spec, i, end)) > 0) { |
| // See if this dot was preceded by a slash in the output. |
| // |
| // Note that we check this in the case of dots so we don't have to |
| // special case slashes. Since slashes are much more common than |
| // dots, this actually increases performance measurably (though |
| // slightly). |
| if (output->length() > path_begin_in_output && |
| output->at(output->length() - 1) == '/') { |
| // Slash followed by a dot, check to see if this is means relative |
| size_t consumed_len; |
| switch (ClassifyAfterDot<CHAR>(spec, i + dotlen, end, |
| &consumed_len)) { |
| case NOT_A_DIRECTORY: |
| // Copy the dot to the output, it means nothing special. |
| output->push_back('.'); |
| i += dotlen - 1; |
| break; |
| case DIRECTORY_CUR: // Current directory, just skip the input. |
| i += dotlen + consumed_len - 1; |
| break; |
| case DIRECTORY_UP: |
| BackUpToPreviousSlash(path_begin_in_output, output); |
| if (last_invalid_percent_index >= output->length()) { |
| last_invalid_percent_index = absl::nullopt; |
| } |
| i += dotlen + consumed_len - 1; |
| break; |
| } |
| } else { |
| // This dot is not preceded by a slash, it is just part of some |
| // file name. |
| output->push_back('.'); |
| i += dotlen - 1; |
| } |
| |
| } else if (out_ch == '\\') { |
| // Convert backslashes to forward slashes |
| output->push_back('/'); |
| |
| } else if (out_ch == '%') { |
| // Handle escape sequences. |
| unsigned char unescaped_value; |
| if (DecodeEscaped(spec, &i, end, &unescaped_value)) { |
| // Valid escape sequence, see if we keep, reject, or unescape it. |
| // Note that at this point DecodeEscape() will have advanced |i| to |
| // the last character of the escape sequence. |
| char unescaped_flags = kPathCharLookup[unescaped_value]; |
| |
| if (unescaped_flags & UNESCAPE) { |
| // This escaped value shouldn't be escaped. Try to copy it. |
| output->push_back(unescaped_value); |
| // If we just unescaped a value within 2 output characters of the |
| // '%' from a previously-detected invalid escape sequence, we |
| // might have an input string with problematic nested escape |
| // sequences; detect and fix them. |
| if (last_invalid_percent_index.has_value() && |
| ((last_invalid_percent_index.value() + 3) >= |
| output->length())) { |
| CheckForNestedEscapes(spec, i + 1, end, |
| last_invalid_percent_index.value(), |
| output); |
| } |
| } else { |
| // Either this is an invalid escaped character, or it's a valid |
| // escaped character we should keep escaped. In the first case we |
| // should just copy it exactly and remember the error. In the |
| // second we also copy exactly in case the server is sensitive to |
| // changing the case of any hex letters. |
| output->push_back('%'); |
| output->push_back(static_cast<char>(spec[i - 1])); |
| output->push_back(static_cast<char>(spec[i])); |
| if (unescaped_flags & INVALID_BIT) |
| success = false; |
| } |
| } else { |
| // Invalid escape sequence. IE7+ rejects any URLs with such |
| // sequences, while other browsers pass them through unchanged. We |
| // use the permissive behavior. |
| // TODO(brettw): Consider testing IE's strict behavior, which would |
| // allow removing the code to handle nested escapes above. |
| last_invalid_percent_index = output->length(); |
| output->push_back('%'); |
| } |
| |
| } else if (flags & INVALID_BIT) { |
| // For NULLs, etc. fail. |
| AppendEscapedChar(out_ch, output); |
| success = false; |
| |
| } else if (flags & ESCAPE_BIT) { |
| // This character should be escaped. |
| AppendEscapedChar(out_ch, output); |
| } |
| } else { |
| // Nothing special about this character, just append it. |
| output->push_back(out_ch); |
| } |
| } |
| } |
| return success; |
| } |
| |
| // Perform the same logic as in DoPartialPathInternal(), but updates the |
| // publicly exposed CanonOutput structure similar to DoPath(). Returns |
| // true if successful. |
| template <typename CHAR, typename UCHAR> |
| bool DoPartialPath(const CHAR* spec, |
| const Component& path, |
| CanonOutput* output, |
| Component* out_path) { |
| out_path->begin = output->length(); |
| bool success = |
| DoPartialPathInternal<CHAR, UCHAR>(spec, path, out_path->begin, output); |
| out_path->len = output->length() - out_path->begin; |
| return success; |
| } |
| |
| template<typename CHAR, typename UCHAR> |
| bool DoPath(const CHAR* spec, |
| const Component& path, |
| CanonOutput* output, |
| Component* out_path) { |
| bool success = true; |
| out_path->begin = output->length(); |
| if (path.len > 0) { |
| // Write out an initial slash if the input has none. If we just parse a URL |
| // and then canonicalize it, it will of course have a slash already. This |
| // check is for the replacement and relative URL resolving cases of file |
| // URLs. |
| if (!IsURLSlash(spec[path.begin])) |
| output->push_back('/'); |
| |
| success = |
| DoPartialPathInternal<CHAR, UCHAR>(spec, path, out_path->begin, output); |
| } else { |
| // No input, canonical path is a slash. |
| output->push_back('/'); |
| } |
| out_path->len = output->length() - out_path->begin; |
| return success; |
| } |
| |
| } // namespace |
| |
| bool CanonicalizePath(const char* spec, |
| const Component& path, |
| CanonOutput* output, |
| Component* out_path) { |
| return DoPath<char, unsigned char>(spec, path, output, out_path); |
| } |
| |
| bool CanonicalizePath(const char16_t* spec, |
| const Component& path, |
| CanonOutput* output, |
| Component* out_path) { |
| return DoPath<char16_t, char16_t>(spec, path, output, out_path); |
| } |
| |
| bool CanonicalizePartialPath(const char* spec, |
| const Component& path, |
| CanonOutput* output, |
| Component* out_path) { |
| return DoPartialPath<char, unsigned char>(spec, path, output, out_path); |
| } |
| |
| bool CanonicalizePartialPath(const char16_t* spec, |
| const Component& path, |
| CanonOutput* output, |
| Component* out_path) { |
| return DoPartialPath<char16_t, char16_t>(spec, path, output, out_path); |
| } |
| |
| bool CanonicalizePartialPathInternal(const char* spec, |
| const Component& path, |
| size_t path_begin_in_output, |
| CanonOutput* output) { |
| return DoPartialPathInternal<char, unsigned char>( |
| spec, path, path_begin_in_output, output); |
| } |
| |
| bool CanonicalizePartialPathInternal(const char16_t* spec, |
| const Component& path, |
| size_t path_begin_in_output, |
| CanonOutput* output) { |
| return DoPartialPathInternal<char16_t, char16_t>( |
| spec, path, path_begin_in_output, output); |
| } |
| |
| } // namespace url |