| // Copyright (c) 2021 The Chromium Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style license that can be |
| // found in the LICENSE file. |
| |
| // This file is autogenerated by the QUICHE Copybara export script. |
| |
| #ifdef QUIC_FLAG |
| |
| QUIC_FLAG(FLAGS_quic_restart_flag_quic_offload_pacing_to_usps2, false) |
| // A testonly reloadable flag that will always default to false. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_testonly_default_false, false) |
| // A testonly reloadable flag that will always default to true. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_testonly_default_true, true) |
| // A testonly restart flag that will always default to false. |
| QUIC_FLAG(FLAGS_quic_restart_flag_quic_testonly_default_false, false) |
| // A testonly restart flag that will always default to true. |
| QUIC_FLAG(FLAGS_quic_restart_flag_quic_testonly_default_true, true) |
| // Donot check amplification limit if there is available pending_timer_transmission_count. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_donot_check_amplification_limit_with_pending_timer_credit, false) |
| // If bytes in flight has dipped below 1.25*MaxBW in the last round, do not exit PROBE_UP due to excess queue buildup. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_bbr2_no_probe_up_exit_if_no_queue, true) |
| // If true, 1) NEW_TOKENs sent from a IETF QUIC session will include the cached network parameters proto, 2) A min_rtt received from a validated token will be used to set the initial rtt, 3) Enable bandwidth resumption for IETF QUIC when connection options BWRE or BWMX exists. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_add_cached_network_parameters_to_address_token, false) |
| // If true, QUIC will default enable MTU discovery at server, with a target of 1450 bytes. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_enable_mtu_discovery_at_server, false) |
| // If true, QUIC won\'t honor the connection option TLPR |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_deprecate_tlpr, true) |
| // If true, QuicGsoBatchWriter will support release time if it is available and the process has the permission to do so. |
| QUIC_FLAG(FLAGS_quic_restart_flag_quic_support_release_time_for_gso, false) |
| // If true, TlsServerHandshaker will be able to 1) request client cert, and 2) verify the client cert in the virtual method TlsServerHandshaker::VerifyCertChain. |
| QUIC_FLAG(FLAGS_quic_restart_flag_quic_tls_server_support_client_cert, true) |
| // If true, abort async QPACK header decompression in QuicSpdyStream::Reset() and in QuicSpdyStream::OnStreamReset(). |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_abort_qpack_on_stream_reset, true) |
| // If true, accept empty crypto frame. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_accept_empty_crypto_frame, false) |
| // If true, ack frequency frame can be sent from server to client. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_can_send_ack_frequency, true) |
| // If true, allow client to enable BBRv2 on server via connection option \'B2ON\'. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_allow_client_enabled_bbr_v2, false) |
| // If true, change QuicCryptoServerStream::FinishProcessingHandshakeMessageAfterProcessClientHello to noop if connection is disconnected. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_crypto_noop_if_disconnected_after_process_chlo, true) |
| // If true, clear undecryptable packets on handshake complete. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_clear_undecryptable_packets_on_handshake_complete, true) |
| // If true, close read side but not write side in QuicSpdyStream::OnStreamReset(). |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_fix_on_stream_reset, true) |
| // If true, default on PTO which unifies TLP + RTO loss recovery. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_default_on_pto, false) |
| // If true, default-enable 5RTO blachole detection. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_default_enable_5rto_blackhole_detection2, true) |
| // If true, delay block allocation in QuicStreamSequencerBuffer until there is actually new data available. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_delay_sequencer_buffer_allocation_until_new_data, true) |
| // If true, disable QUIC version Q043. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_disable_version_q043, false) |
| // If true, disable QUIC version Q046. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_disable_version_q046, false) |
| // If true, disable QUIC version Q050. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_disable_version_q050, false) |
| // If true, disable QUIC version h3 (RFCv1). |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_disable_version_rfcv1, false) |
| // If true, disable QUIC version h3-29. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_disable_version_draft_29, false) |
| // If true, disable blackhole detection on server side. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_disable_server_blackhole_detection, false) |
| // If true, discard INITIAL packet if the key has been dropped. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_discard_initial_packet_with_key_dropped, true) |
| // If true, do not bundle 2nd ACK with connection close if there is an ACK queued. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_single_ack_in_packet2, false) |
| // If true, do not call ProofSourceHandle::SelectCertificate if QUIC connection has disconnected. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_tls_no_select_cert_if_disconnected, true) |
| // If true, do not count bytes sent/received on the alternative path into the bytes sent/received on the default path. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_count_bytes_on_alternative_path_seperately, true) |
| // If true, do not re-arm PTO while sending application data during handshake. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_donot_rearm_pto_on_application_data_during_handshake, true) |
| // If true, do not use the gQUIC common certificate set for certificate compression. |
| QUIC_FLAG(FLAGS_quic_restart_flag_quic_no_common_cert_set, false) |
| // If true, drop unsent PATH_RESPONSEs and rely on peer\'s retry. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_drop_unsent_path_response, true) |
| // If true, enable server retransmittable on wire PING. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_enable_server_on_wire_ping, true) |
| // If true, flush pending frames as well as pending padding bytes on connection migration. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_flush_pending_frames_and_padding_bytes_on_migration, true) |
| // If true, ietf connection migration is no longer conditioned on connection option RVCM. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_remove_connection_migration_connection_option, false) |
| // If true, ignore peer_max_ack_delay during handshake. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_ignore_peer_max_ack_delay_during_handshake, true) |
| // If true, include stream information in idle timeout connection close detail. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_add_stream_info_to_idle_close_detail, true) |
| // If true, pass the received PATH_RESPONSE payload to path validator to move forward the path validation. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_pass_path_response_to_validator, true) |
| // If true, quic server will send ENABLE_CONNECT_PROTOCOL setting and and endpoint will validate required request/response headers and extended CONNECT mechanism and update code counts of valid/invalid headers. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_verify_request_headers_2, true) |
| // If true, record addresses that server has sent reset to recently, and do not send reset if the address lives in the set. |
| QUIC_FLAG(FLAGS_quic_restart_flag_quic_use_recent_reset_addresses, true) |
| // If true, reject or send error response code upon receiving invalid request or response headers. This flag depends on --gfe2_reloadable_flag_quic_verify_request_headers_2. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_act_upon_invalid_header, false) |
| // If true, require handshake confirmation for QUIC connections, functionally disabling 0-rtt handshakes. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_require_handshake_confirmation, false) |
| // If true, reset per packet state before processing undecryptable packets. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_reset_per_packet_state_for_undecryptable_packets, true) |
| // If true, send PATH_RESPONSE upon receiving PATH_CHALLENGE regardless of perspective. --gfe2_reloadable_flag_quic_start_peer_migration_earlier has to be true before turn on this flag. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_send_path_response2, true) |
| // If true, set burst token to 2 in cwnd bootstrapping experiment. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_conservative_bursts, false) |
| // If true, stop resetting ideal_next_packet_send_time_ in pacing sender. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_donot_reset_ideal_next_packet_send_time, false) |
| // If true, suppress crypto data write in mid of packet processing. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_suppress_write_mid_packet_processing, true) |
| // If true, use BBRv2 as the default congestion controller. Takes precedence over --quic_default_to_bbr. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_default_to_bbr_v2, false) |
| // If true, use max(max_bw, send_rate) as the estimated bandwidth in QUIC\'s MaxAckHeightTracker. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_bbr_use_send_rate_in_max_ack_height_tracker, true) |
| // If true, use new connection ID in connection migration. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_connection_migration_use_new_cid_v2, true) |
| // If true, uses conservative cwnd gain and pacing gain when cwnd gets bootstrapped. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_conservative_cwnd_and_pacing_gains, false) |
| // If true, validate that peer owns the new address once the server detects peer migration or is probed from that address, and also apply anti-amplification limit while sending to that address. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_server_reverse_validate_new_path3, true) |
| // If true, when client attempts TLS resumption, use token in session_cache_ instead of cached_states_ in QuicCryptoClientConfig. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_tls_use_token_in_session_cache, true) |
| // When receiving STOP_SENDING, send a RESET_STREAM with a matching error code. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_match_ietf_reset_code, true) |
| // When the flag is true, exit STARTUP after the same number of loss events as PROBE_UP. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_bbr2_startup_probe_up_loss_events, true) |
| // When true, QUIC server will ignore received key_update_not_yet_supported transport parameter. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_ignore_key_update_not_yet_supported, true) |
| // When true, QUIC server will ignore received user agent transport parameter and rely on getting that information from HTTP headers. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_ignore_user_agent_transport_parameter, true) |
| // When true, QUIC will both send and validate the version_information transport parameter. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_version_information, false) |
| // When true, QuicDispatcher will silently drop incoming packets whose UDP source port is on the blocklist. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_blocked_ports, true) |
| // When true, defaults to BBR congestion control instead of Cubic. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_default_to_bbr, false) |
| // When true, prevents QUIC\'s PacingSender from generating bursts when the congestion controller is CWND limited and not pacing limited. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_fix_pacing_sender_bursts, false) |
| // When true, set the initial congestion control window from connection options in QuicSentPacketManager rather than TcpCubicSenderBytes. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_unified_iw_options, true) |
| // When true, the B203 connection option causes the Bbr2Sender to ignore inflight_hi during PROBE_UP and increase it when the bytes delivered without loss are higher. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_bbr2_ignore_inflight_hi_in_probe_up, true) |
| // When true, the B205 connection option enables extra acked in STARTUP, and B204 adds new logic to decrease it whenever max bandwidth increases. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_bbr2_startup_extra_acked, true) |
| // When true, the B207 connection option causes BBR2 to exit STARTUP if a persistent queue of 2*BDP has existed for the entire round. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_bbr2_exit_startup_on_persistent_queue2, true) |
| // When true, the BBQ0 connection option causes QUIC BBR2 to add bytes_acked to probe_up_acked if the connection hasn\'t been app-limited since inflight_hi was utilized. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_bbr2_add_bytes_acked_after_inflight_hi_limited, true) |
| // When true, the BBR4 copt sets the extra_acked window to 20 RTTs and BBR5 sets it to 40 RTTs. |
| QUIC_FLAG(FLAGS_quic_reloadable_flag_quic_bbr2_extra_acked_window, true) |
| |
| #endif |
| |