| // Copyright 2019 The Chromium Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style license that can be |
| // found in the LICENSE file. |
| |
| #include "quic/core/congestion_control/bbr2_probe_bw.h" |
| |
| #include "quic/core/congestion_control/bbr2_misc.h" |
| #include "quic/core/congestion_control/bbr2_sender.h" |
| #include "quic/core/quic_bandwidth.h" |
| #include "quic/core/quic_time.h" |
| #include "quic/core/quic_types.h" |
| #include "quic/platform/api/quic_flag_utils.h" |
| #include "quic/platform/api/quic_flags.h" |
| #include "quic/platform/api/quic_logging.h" |
| |
| namespace quic { |
| |
| void Bbr2ProbeBwMode::Enter(QuicTime now, |
| const Bbr2CongestionEvent* /*congestion_event*/) { |
| if (cycle_.phase == CyclePhase::PROBE_NOT_STARTED) { |
| // First time entering PROBE_BW. Start a new probing cycle. |
| EnterProbeDown(/*probed_too_high=*/false, /*stopped_risky_probe=*/false, |
| now); |
| } else { |
| // Transitioning from PROBE_RTT to PROBE_BW. Re-enter the last phase before |
| // PROBE_RTT. |
| QUICHE_DCHECK(cycle_.phase == CyclePhase::PROBE_CRUISE || |
| cycle_.phase == CyclePhase::PROBE_REFILL); |
| cycle_.cycle_start_time = now; |
| if (cycle_.phase == CyclePhase::PROBE_CRUISE) { |
| EnterProbeCruise(now); |
| } else if (cycle_.phase == CyclePhase::PROBE_REFILL) { |
| EnterProbeRefill(cycle_.probe_up_rounds, now); |
| } |
| } |
| } |
| |
| Bbr2Mode Bbr2ProbeBwMode::OnCongestionEvent( |
| QuicByteCount prior_in_flight, |
| QuicTime event_time, |
| const AckedPacketVector& /*acked_packets*/, |
| const LostPacketVector& /*lost_packets*/, |
| const Bbr2CongestionEvent& congestion_event) { |
| QUICHE_DCHECK_NE(cycle_.phase, CyclePhase::PROBE_NOT_STARTED); |
| |
| if (congestion_event.end_of_round_trip) { |
| if (cycle_.cycle_start_time != event_time) { |
| ++cycle_.rounds_since_probe; |
| } |
| if (cycle_.phase_start_time != event_time) { |
| ++cycle_.rounds_in_phase; |
| } |
| } |
| |
| bool switch_to_probe_rtt = false; |
| |
| if (cycle_.phase == CyclePhase::PROBE_UP) { |
| UpdateProbeUp(prior_in_flight, congestion_event); |
| } else if (cycle_.phase == CyclePhase::PROBE_DOWN) { |
| UpdateProbeDown(prior_in_flight, congestion_event); |
| // Maybe transition to PROBE_RTT at the end of this cycle. |
| if (cycle_.phase != CyclePhase::PROBE_DOWN && |
| model_->MaybeExpireMinRtt(congestion_event)) { |
| switch_to_probe_rtt = true; |
| } |
| } else if (cycle_.phase == CyclePhase::PROBE_CRUISE) { |
| UpdateProbeCruise(congestion_event); |
| } else if (cycle_.phase == CyclePhase::PROBE_REFILL) { |
| UpdateProbeRefill(congestion_event); |
| } |
| |
| // Do not need to set the gains if switching to PROBE_RTT, they will be set |
| // when Bbr2ProbeRttMode::Enter is called. |
| if (!switch_to_probe_rtt) { |
| model_->set_pacing_gain(PacingGainForPhase(cycle_.phase)); |
| model_->set_cwnd_gain(Params().probe_bw_cwnd_gain); |
| } |
| |
| return switch_to_probe_rtt ? Bbr2Mode::PROBE_RTT : Bbr2Mode::PROBE_BW; |
| } |
| |
| Limits<QuicByteCount> Bbr2ProbeBwMode::GetCwndLimits() const { |
| if (!GetQuicReloadableFlag(quic_bbr2_avoid_too_low_probe_bw_cwnd)) { |
| if (cycle_.phase == CyclePhase::PROBE_CRUISE) { |
| return NoGreaterThan( |
| std::min(model_->inflight_lo(), model_->inflight_hi_with_headroom())); |
| } |
| |
| return NoGreaterThan( |
| std::min(model_->inflight_lo(), model_->inflight_hi())); |
| } |
| |
| QUIC_RELOADABLE_FLAG_COUNT(quic_bbr2_avoid_too_low_probe_bw_cwnd); |
| |
| QuicByteCount upper_limit = |
| std::min(model_->inflight_lo(), cycle_.phase == CyclePhase::PROBE_CRUISE |
| ? model_->inflight_hi_with_headroom() |
| : model_->inflight_hi()); |
| |
| if (Params().avoid_too_low_probe_bw_cwnd) { |
| // Ensure upper_limit is at least BDP + AckHeight. |
| QuicByteCount bdp_with_ack_height = |
| model_->BDP(model_->MaxBandwidth()) + model_->MaxAckHeight(); |
| if (upper_limit < bdp_with_ack_height) { |
| QUIC_DVLOG(3) << sender_ << " Rasing upper_limit from " << upper_limit |
| << " to " << bdp_with_ack_height; |
| QUIC_CODE_COUNT(quic_bbr2_avoid_too_low_probe_bw_cwnd_in_effect); |
| upper_limit = bdp_with_ack_height; |
| } |
| } |
| |
| return NoGreaterThan(upper_limit); |
| } |
| |
| bool Bbr2ProbeBwMode::IsProbingForBandwidth() const { |
| return cycle_.phase == CyclePhase::PROBE_REFILL || |
| cycle_.phase == CyclePhase::PROBE_UP; |
| } |
| |
| Bbr2Mode Bbr2ProbeBwMode::OnExitQuiescence(QuicTime now, |
| QuicTime quiescence_start_time) { |
| QUIC_DVLOG(3) << sender_ << " Postponing min_rtt_timestamp(" |
| << model_->MinRttTimestamp() << ") by " |
| << now - quiescence_start_time; |
| model_->PostponeMinRttTimestamp(now - quiescence_start_time); |
| return Bbr2Mode::PROBE_BW; |
| } |
| |
| // TODO(ianswett): Remove prior_in_flight from UpdateProbeDown. |
| void Bbr2ProbeBwMode::UpdateProbeDown( |
| QuicByteCount prior_in_flight, |
| const Bbr2CongestionEvent& congestion_event) { |
| QUICHE_DCHECK_EQ(cycle_.phase, CyclePhase::PROBE_DOWN); |
| |
| if (cycle_.rounds_in_phase == 1 && congestion_event.end_of_round_trip) { |
| cycle_.is_sample_from_probing = false; |
| |
| if (!congestion_event.last_sample_is_app_limited) { |
| QUIC_DVLOG(2) |
| << sender_ |
| << " Advancing max bw filter after one round in PROBE_DOWN."; |
| model_->AdvanceMaxBandwidthFilter(); |
| cycle_.has_advanced_max_bw = true; |
| } |
| |
| if (last_cycle_stopped_risky_probe_ && !last_cycle_probed_too_high_) { |
| EnterProbeRefill(/*probe_up_rounds=*/0, congestion_event.event_time); |
| return; |
| } |
| } |
| |
| MaybeAdaptUpperBounds(congestion_event); |
| |
| if (IsTimeToProbeBandwidth(congestion_event)) { |
| EnterProbeRefill(/*probe_up_rounds=*/0, congestion_event.event_time); |
| return; |
| } |
| |
| if (HasStayedLongEnoughInProbeDown(congestion_event)) { |
| QUIC_DVLOG(3) << sender_ << " Proportional time based PROBE_DOWN exit"; |
| EnterProbeCruise(congestion_event.event_time); |
| return; |
| } |
| |
| const QuicByteCount inflight_with_headroom = |
| model_->inflight_hi_with_headroom(); |
| QUIC_DVLOG(3) |
| << sender_ |
| << " Checking if have enough inflight headroom. prior_in_flight:" |
| << prior_in_flight << " congestion_event.bytes_in_flight:" |
| << congestion_event.bytes_in_flight |
| << ", inflight_with_headroom:" << inflight_with_headroom; |
| QuicByteCount bytes_in_flight = congestion_event.bytes_in_flight; |
| |
| if (bytes_in_flight > inflight_with_headroom) { |
| // Stay in PROBE_DOWN. |
| return; |
| } |
| |
| // Transition to PROBE_CRUISE iff we've drained to target. |
| QuicByteCount bdp = model_->BDP(); |
| QUIC_DVLOG(3) << sender_ << " Checking if drained to target. bytes_in_flight:" |
| << bytes_in_flight << ", bdp:" << bdp; |
| if (bytes_in_flight < bdp) { |
| EnterProbeCruise(congestion_event.event_time); |
| } |
| } |
| |
| Bbr2ProbeBwMode::AdaptUpperBoundsResult Bbr2ProbeBwMode::MaybeAdaptUpperBounds( |
| const Bbr2CongestionEvent& congestion_event) { |
| const SendTimeState& send_state = congestion_event.last_packet_send_state; |
| if (!send_state.is_valid) { |
| QUIC_DVLOG(3) << sender_ << " " << cycle_.phase |
| << ": NOT_ADAPTED_INVALID_SAMPLE"; |
| return NOT_ADAPTED_INVALID_SAMPLE; |
| } |
| |
| // TODO(ianswett): Rename to bytes_delivered if |
| // use_bytes_delivered_for_inflight_hi is default enabled. |
| QuicByteCount inflight_at_send = BytesInFlight(send_state); |
| if (Params().use_bytes_delivered_for_inflight_hi) { |
| if (congestion_event.last_packet_send_state.total_bytes_acked <= |
| model_->total_bytes_acked()) { |
| inflight_at_send = |
| model_->total_bytes_acked() - |
| congestion_event.last_packet_send_state.total_bytes_acked; |
| } else { |
| QUIC_BUG << "Total_bytes_acked(" << model_->total_bytes_acked() |
| << ") < send_state.total_bytes_acked(" |
| << congestion_event.last_packet_send_state.total_bytes_acked |
| << ")"; |
| } |
| } |
| if (model_->IsInflightTooHigh(congestion_event, |
| Params().probe_bw_full_loss_count)) { |
| if (cycle_.is_sample_from_probing) { |
| cycle_.is_sample_from_probing = false; |
| |
| if (!send_state.is_app_limited) { |
| const QuicByteCount inflight_target = |
| sender_->GetTargetBytesInflight() * (1.0 - Params().beta); |
| if (inflight_at_send >= inflight_target) { |
| // The new code does not change behavior. |
| QUIC_CODE_COUNT(quic_bbr2_cut_inflight_hi_gradually_noop); |
| } else { |
| // The new code actually cuts inflight_hi slower than before. |
| QUIC_CODE_COUNT(quic_bbr2_cut_inflight_hi_gradually_in_effect); |
| } |
| if (Params().limit_inflight_hi_by_max_delivered) { |
| QuicByteCount new_inflight_hi = |
| std::max(inflight_at_send, inflight_target); |
| if (new_inflight_hi >= model_->max_bytes_delivered_in_round()) { |
| QUIC_CODE_COUNT(quic_bbr2_cut_inflight_hi_max_delivered_noop); |
| } else { |
| QUIC_CODE_COUNT(quic_bbr2_cut_inflight_hi_max_delivered_in_effect); |
| new_inflight_hi = model_->max_bytes_delivered_in_round(); |
| } |
| QUIC_DVLOG(3) << sender_ |
| << " Setting inflight_hi due to loss. new_inflight_hi:" |
| << new_inflight_hi |
| << ", inflight_at_send:" << inflight_at_send |
| << ", inflight_target:" << inflight_target |
| << ", max_bytes_delivered_in_round:" |
| << model_->max_bytes_delivered_in_round() << " @ " |
| << congestion_event.event_time; |
| model_->set_inflight_hi(new_inflight_hi); |
| } else { |
| model_->set_inflight_hi(std::max(inflight_at_send, inflight_target)); |
| } |
| } |
| |
| QUIC_DVLOG(3) << sender_ << " " << cycle_.phase |
| << ": ADAPTED_PROBED_TOO_HIGH"; |
| return ADAPTED_PROBED_TOO_HIGH; |
| } |
| return ADAPTED_OK; |
| } |
| |
| if (model_->inflight_hi() == model_->inflight_hi_default()) { |
| QUIC_DVLOG(3) << sender_ << " " << cycle_.phase |
| << ": NOT_ADAPTED_INFLIGHT_HIGH_NOT_SET"; |
| return NOT_ADAPTED_INFLIGHT_HIGH_NOT_SET; |
| } |
| |
| // Raise the upper bound for inflight. |
| if (inflight_at_send > model_->inflight_hi()) { |
| QUIC_DVLOG(3) |
| << sender_ << " " << cycle_.phase |
| << ": Adapting inflight_hi from inflight_at_send. inflight_at_send:" |
| << inflight_at_send << ", old inflight_hi:" << model_->inflight_hi(); |
| model_->set_inflight_hi(inflight_at_send); |
| } |
| |
| return ADAPTED_OK; |
| } |
| |
| bool Bbr2ProbeBwMode::IsTimeToProbeBandwidth( |
| const Bbr2CongestionEvent& congestion_event) const { |
| if (HasCycleLasted(cycle_.probe_wait_time, congestion_event)) { |
| return true; |
| } |
| |
| if (IsTimeToProbeForRenoCoexistence(1.0, congestion_event)) { |
| ++sender_->connection_stats_->bbr_num_short_cycles_for_reno_coexistence; |
| return true; |
| } |
| return false; |
| } |
| |
| // QUIC only. Used to prevent a Bbr2 flow from staying in PROBE_DOWN for too |
| // long, as seen in some multi-sender simulator tests. |
| bool Bbr2ProbeBwMode::HasStayedLongEnoughInProbeDown( |
| const Bbr2CongestionEvent& congestion_event) const { |
| // Stay in PROBE_DOWN for at most the time of a min rtt, as it is done in |
| // BBRv1. |
| // TODO(wub): Consider exit after a full round instead, which typically |
| // indicates most(if not all) packets sent during PROBE_UP have been acked. |
| return HasPhaseLasted(model_->MinRtt(), congestion_event); |
| } |
| |
| bool Bbr2ProbeBwMode::HasCycleLasted( |
| QuicTime::Delta duration, |
| const Bbr2CongestionEvent& congestion_event) const { |
| bool result = |
| (congestion_event.event_time - cycle_.cycle_start_time) > duration; |
| QUIC_DVLOG(3) << sender_ << " " << cycle_.phase |
| << ": HasCycleLasted=" << result << ". elapsed:" |
| << (congestion_event.event_time - cycle_.cycle_start_time) |
| << ", duration:" << duration; |
| return result; |
| } |
| |
| bool Bbr2ProbeBwMode::HasPhaseLasted( |
| QuicTime::Delta duration, |
| const Bbr2CongestionEvent& congestion_event) const { |
| bool result = |
| (congestion_event.event_time - cycle_.phase_start_time) > duration; |
| QUIC_DVLOG(3) << sender_ << " " << cycle_.phase |
| << ": HasPhaseLasted=" << result << ". elapsed:" |
| << (congestion_event.event_time - cycle_.phase_start_time) |
| << ", duration:" << duration; |
| return result; |
| } |
| |
| bool Bbr2ProbeBwMode::IsTimeToProbeForRenoCoexistence( |
| double probe_wait_fraction, |
| const Bbr2CongestionEvent& /*congestion_event*/) const { |
| if (!Params().enable_reno_coexistence) { |
| return false; |
| } |
| |
| uint64_t rounds = Params().probe_bw_probe_max_rounds; |
| if (Params().probe_bw_probe_reno_gain > 0.0) { |
| QuicByteCount target_bytes_inflight = sender_->GetTargetBytesInflight(); |
| uint64_t reno_rounds = Params().probe_bw_probe_reno_gain * |
| target_bytes_inflight / kDefaultTCPMSS; |
| rounds = std::min(rounds, reno_rounds); |
| } |
| bool result = cycle_.rounds_since_probe >= (rounds * probe_wait_fraction); |
| QUIC_DVLOG(3) << sender_ << " " << cycle_.phase |
| << ": IsTimeToProbeForRenoCoexistence=" << result |
| << ". rounds_since_probe:" << cycle_.rounds_since_probe |
| << ", rounds:" << rounds |
| << ", probe_wait_fraction:" << probe_wait_fraction; |
| return result; |
| } |
| |
| void Bbr2ProbeBwMode::RaiseInflightHighSlope() { |
| QUICHE_DCHECK_EQ(cycle_.phase, CyclePhase::PROBE_UP); |
| uint64_t growth_this_round = 1 << cycle_.probe_up_rounds; |
| // The number 30 below means |growth_this_round| is capped at 1G and the lower |
| // bound of |probe_up_bytes| is (practically) 1 mss, at this speed inflight_hi |
| // grows by approximately 1 packet per packet acked. |
| cycle_.probe_up_rounds = std::min<uint64_t>(cycle_.probe_up_rounds + 1, 30); |
| uint64_t probe_up_bytes = sender_->GetCongestionWindow() / growth_this_round; |
| cycle_.probe_up_bytes = |
| std::max<QuicByteCount>(probe_up_bytes, kDefaultTCPMSS); |
| QUIC_DVLOG(3) << sender_ << " Rasing inflight_hi slope. probe_up_rounds:" |
| << cycle_.probe_up_rounds |
| << ", probe_up_bytes:" << cycle_.probe_up_bytes; |
| } |
| |
| void Bbr2ProbeBwMode::ProbeInflightHighUpward( |
| const Bbr2CongestionEvent& congestion_event) { |
| QUICHE_DCHECK_EQ(cycle_.phase, CyclePhase::PROBE_UP); |
| if (!model_->IsCongestionWindowLimited(congestion_event)) { |
| QUIC_DVLOG(3) << sender_ |
| << " Raising inflight_hi early return: Not cwnd limited."; |
| // Not fully utilizing cwnd, so can't safely grow. |
| return; |
| } |
| |
| if (congestion_event.prior_cwnd < model_->inflight_hi()) { |
| QUIC_DVLOG(3) |
| << sender_ |
| << " Raising inflight_hi early return: inflight_hi not fully used."; |
| // Not fully using inflight_hi, so don't grow it. |
| return; |
| } |
| |
| // Increase inflight_hi by the number of probe_up_bytes within probe_up_acked. |
| cycle_.probe_up_acked += congestion_event.bytes_acked; |
| if (cycle_.probe_up_acked >= cycle_.probe_up_bytes) { |
| uint64_t delta = cycle_.probe_up_acked / cycle_.probe_up_bytes; |
| cycle_.probe_up_acked -= delta * cycle_.probe_up_bytes; |
| QuicByteCount new_inflight_hi = |
| model_->inflight_hi() + delta * kDefaultTCPMSS; |
| if (new_inflight_hi > model_->inflight_hi()) { |
| QUIC_DVLOG(3) << sender_ << " Raising inflight_hi from " |
| << model_->inflight_hi() << " to " << new_inflight_hi |
| << ". probe_up_bytes:" << cycle_.probe_up_bytes |
| << ", delta:" << delta |
| << ", (new)probe_up_acked:" << cycle_.probe_up_acked; |
| |
| model_->set_inflight_hi(new_inflight_hi); |
| } else { |
| QUIC_BUG << "Not growing inflight_hi due to wrap around. Old value:" |
| << model_->inflight_hi() << ", new value:" << new_inflight_hi; |
| } |
| } |
| |
| if (congestion_event.end_of_round_trip) { |
| RaiseInflightHighSlope(); |
| } |
| } |
| |
| void Bbr2ProbeBwMode::UpdateProbeCruise( |
| const Bbr2CongestionEvent& congestion_event) { |
| QUICHE_DCHECK_EQ(cycle_.phase, CyclePhase::PROBE_CRUISE); |
| MaybeAdaptUpperBounds(congestion_event); |
| QUICHE_DCHECK(!cycle_.is_sample_from_probing); |
| |
| if (IsTimeToProbeBandwidth(congestion_event)) { |
| EnterProbeRefill(/*probe_up_rounds=*/0, congestion_event.event_time); |
| return; |
| } |
| } |
| |
| void Bbr2ProbeBwMode::UpdateProbeRefill( |
| const Bbr2CongestionEvent& congestion_event) { |
| QUICHE_DCHECK_EQ(cycle_.phase, CyclePhase::PROBE_REFILL); |
| MaybeAdaptUpperBounds(congestion_event); |
| QUICHE_DCHECK(!cycle_.is_sample_from_probing); |
| |
| if (cycle_.rounds_in_phase > 0 && congestion_event.end_of_round_trip) { |
| EnterProbeUp(congestion_event.event_time); |
| return; |
| } |
| } |
| |
| void Bbr2ProbeBwMode::UpdateProbeUp( |
| QuicByteCount prior_in_flight, |
| const Bbr2CongestionEvent& congestion_event) { |
| QUICHE_DCHECK_EQ(cycle_.phase, CyclePhase::PROBE_UP); |
| if (MaybeAdaptUpperBounds(congestion_event) == ADAPTED_PROBED_TOO_HIGH) { |
| EnterProbeDown(/*probed_too_high=*/true, /*stopped_risky_probe=*/false, |
| congestion_event.event_time); |
| return; |
| } |
| |
| // TODO(wub): Consider exit PROBE_UP after a certain number(e.g. 64) of RTTs. |
| |
| ProbeInflightHighUpward(congestion_event); |
| |
| bool is_risky = false; |
| bool is_queuing = false; |
| if (last_cycle_probed_too_high_ && prior_in_flight >= model_->inflight_hi()) { |
| is_risky = true; |
| QUIC_DVLOG(3) << sender_ |
| << " Probe is too risky. last_cycle_probed_too_high_:" |
| << last_cycle_probed_too_high_ |
| << ", prior_in_flight:" << prior_in_flight |
| << ", inflight_hi:" << model_->inflight_hi(); |
| // TCP uses min_rtt instead of a full round: |
| // HasPhaseLasted(model_->MinRtt(), congestion_event) |
| } else if (cycle_.rounds_in_phase > 0) { |
| const QuicByteCount bdp = model_->BDP(); |
| QuicByteCount queuing_threshold_extra_bytes = 2 * kDefaultTCPMSS; |
| if (Params().add_ack_height_to_queueing_threshold) { |
| queuing_threshold_extra_bytes += model_->MaxAckHeight(); |
| } |
| QuicByteCount queuing_threshold = |
| (Params().probe_bw_probe_inflight_gain * bdp) + |
| queuing_threshold_extra_bytes; |
| |
| is_queuing = congestion_event.bytes_in_flight >= queuing_threshold; |
| |
| QUIC_DVLOG(3) << sender_ |
| << " Checking if building up a queue. prior_in_flight:" |
| << prior_in_flight |
| << ", post_in_flight:" << congestion_event.bytes_in_flight |
| << ", threshold:" << queuing_threshold |
| << ", is_queuing:" << is_queuing |
| << ", max_bw:" << model_->MaxBandwidth() |
| << ", min_rtt:" << model_->MinRtt(); |
| } |
| |
| if (is_risky || is_queuing) { |
| EnterProbeDown(/*probed_too_high=*/false, /*stopped_risky_probe=*/is_risky, |
| congestion_event.event_time); |
| } |
| } |
| |
| void Bbr2ProbeBwMode::EnterProbeDown(bool probed_too_high, |
| bool stopped_risky_probe, |
| QuicTime now) { |
| QUIC_DVLOG(2) << sender_ << " Phase change: " << cycle_.phase << " ==> " |
| << CyclePhase::PROBE_DOWN << " after " |
| << now - cycle_.phase_start_time << ", or " |
| << cycle_.rounds_in_phase |
| << " rounds. probed_too_high:" << probed_too_high |
| << ", stopped_risky_probe:" << stopped_risky_probe << " @ " |
| << now; |
| last_cycle_probed_too_high_ = probed_too_high; |
| last_cycle_stopped_risky_probe_ = stopped_risky_probe; |
| |
| cycle_.cycle_start_time = now; |
| cycle_.phase = CyclePhase::PROBE_DOWN; |
| cycle_.rounds_in_phase = 0; |
| cycle_.phase_start_time = now; |
| ++sender_->connection_stats_->bbr_num_cycles; |
| |
| // Pick probe wait time. |
| cycle_.rounds_since_probe = |
| sender_->RandomUint64(Params().probe_bw_max_probe_rand_rounds); |
| cycle_.probe_wait_time = |
| Params().probe_bw_probe_base_duration + |
| QuicTime::Delta::FromMicroseconds(sender_->RandomUint64( |
| Params().probe_bw_probe_max_rand_duration.ToMicroseconds())); |
| |
| cycle_.probe_up_bytes = std::numeric_limits<QuicByteCount>::max(); |
| cycle_.has_advanced_max_bw = false; |
| model_->RestartRoundEarly(); |
| } |
| |
| void Bbr2ProbeBwMode::EnterProbeCruise(QuicTime now) { |
| if (cycle_.phase == CyclePhase::PROBE_DOWN) { |
| ExitProbeDown(); |
| } |
| QUIC_DVLOG(2) << sender_ << " Phase change: " << cycle_.phase << " ==> " |
| << CyclePhase::PROBE_CRUISE << " after " |
| << now - cycle_.phase_start_time << ", or " |
| << cycle_.rounds_in_phase << " rounds. @ " << now; |
| |
| model_->cap_inflight_lo(model_->inflight_hi()); |
| cycle_.phase = CyclePhase::PROBE_CRUISE; |
| cycle_.rounds_in_phase = 0; |
| cycle_.phase_start_time = now; |
| cycle_.is_sample_from_probing = false; |
| } |
| |
| void Bbr2ProbeBwMode::EnterProbeRefill(uint64_t probe_up_rounds, QuicTime now) { |
| if (cycle_.phase == CyclePhase::PROBE_DOWN) { |
| ExitProbeDown(); |
| } |
| QUIC_DVLOG(2) << sender_ << " Phase change: " << cycle_.phase << " ==> " |
| << CyclePhase::PROBE_REFILL << " after " |
| << now - cycle_.phase_start_time << ", or " |
| << cycle_.rounds_in_phase |
| << " rounds. probe_up_rounds:" << probe_up_rounds << " @ " |
| << now; |
| cycle_.phase = CyclePhase::PROBE_REFILL; |
| cycle_.rounds_in_phase = 0; |
| cycle_.phase_start_time = now; |
| cycle_.is_sample_from_probing = false; |
| last_cycle_stopped_risky_probe_ = false; |
| |
| model_->clear_bandwidth_lo(); |
| model_->clear_inflight_lo(); |
| cycle_.probe_up_rounds = probe_up_rounds; |
| cycle_.probe_up_acked = 0; |
| model_->RestartRoundEarly(); |
| } |
| |
| void Bbr2ProbeBwMode::EnterProbeUp(QuicTime now) { |
| QUICHE_DCHECK_EQ(cycle_.phase, CyclePhase::PROBE_REFILL); |
| QUIC_DVLOG(2) << sender_ << " Phase change: " << cycle_.phase << " ==> " |
| << CyclePhase::PROBE_UP << " after " |
| << now - cycle_.phase_start_time << ", or " |
| << cycle_.rounds_in_phase << " rounds. @ " << now; |
| cycle_.phase = CyclePhase::PROBE_UP; |
| cycle_.rounds_in_phase = 0; |
| cycle_.phase_start_time = now; |
| cycle_.is_sample_from_probing = true; |
| RaiseInflightHighSlope(); |
| |
| model_->RestartRoundEarly(); |
| } |
| |
| void Bbr2ProbeBwMode::ExitProbeDown() { |
| QUICHE_DCHECK_EQ(cycle_.phase, CyclePhase::PROBE_DOWN); |
| if (!cycle_.has_advanced_max_bw) { |
| QUIC_DVLOG(2) << sender_ << " Advancing max bw filter at end of cycle."; |
| model_->AdvanceMaxBandwidthFilter(); |
| cycle_.has_advanced_max_bw = true; |
| } |
| } |
| |
| // static |
| const char* Bbr2ProbeBwMode::CyclePhaseToString(CyclePhase phase) { |
| switch (phase) { |
| case CyclePhase::PROBE_NOT_STARTED: |
| return "PROBE_NOT_STARTED"; |
| case CyclePhase::PROBE_UP: |
| return "PROBE_UP"; |
| case CyclePhase::PROBE_DOWN: |
| return "PROBE_DOWN"; |
| case CyclePhase::PROBE_CRUISE: |
| return "PROBE_CRUISE"; |
| case CyclePhase::PROBE_REFILL: |
| return "PROBE_REFILL"; |
| default: |
| break; |
| } |
| return "<Invalid CyclePhase>"; |
| } |
| |
| std::ostream& operator<<(std::ostream& os, |
| const Bbr2ProbeBwMode::CyclePhase phase) { |
| return os << Bbr2ProbeBwMode::CyclePhaseToString(phase); |
| } |
| |
| Bbr2ProbeBwMode::DebugState Bbr2ProbeBwMode::ExportDebugState() const { |
| DebugState s; |
| s.phase = cycle_.phase; |
| s.cycle_start_time = cycle_.cycle_start_time; |
| s.phase_start_time = cycle_.phase_start_time; |
| return s; |
| } |
| |
| std::ostream& operator<<(std::ostream& os, |
| const Bbr2ProbeBwMode::DebugState& state) { |
| os << "[PROBE_BW] phase: " << state.phase << "\n"; |
| os << "[PROBE_BW] cycle_start_time: " << state.cycle_start_time << "\n"; |
| os << "[PROBE_BW] phase_start_time: " << state.phase_start_time << "\n"; |
| return os; |
| } |
| |
| const Bbr2Params& Bbr2ProbeBwMode::Params() const { |
| return sender_->Params(); |
| } |
| |
| float Bbr2ProbeBwMode::PacingGainForPhase( |
| Bbr2ProbeBwMode::CyclePhase phase) const { |
| if (phase == Bbr2ProbeBwMode::CyclePhase::PROBE_UP) { |
| return Params().probe_bw_probe_up_pacing_gain; |
| } |
| if (phase == Bbr2ProbeBwMode::CyclePhase::PROBE_DOWN) { |
| return Params().probe_bw_probe_down_pacing_gain; |
| } |
| return Params().probe_bw_default_pacing_gain; |
| } |
| |
| } // namespace quic |
