blob: 20ab087174ec65e4294b6d0cba13e344ef0916d6 [file] [log] [blame]
// Copyright (c) 2012 The Chromium Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.
#ifndef QUICHE_QUIC_CORE_QUIC_ERROR_CODES_H_
#define QUICHE_QUIC_CORE_QUIC_ERROR_CODES_H_
#include <cstdint>
#include <limits>
#include <string>
#include "net/third_party/quiche/src/quic/platform/api/quic_export.h"
namespace quic {
enum QuicRstStreamErrorCode {
// Complete response has been sent, sending a RST to ask the other endpoint
// to stop sending request data without discarding the response.
QUIC_STREAM_NO_ERROR = 0,
// There was some error which halted stream processing.
QUIC_ERROR_PROCESSING_STREAM = 1,
// We got two fin or reset offsets which did not match.
QUIC_MULTIPLE_TERMINATION_OFFSETS = 2,
// We got bad payload and can not respond to it at the protocol level.
QUIC_BAD_APPLICATION_PAYLOAD = 3,
// Stream closed due to connection error. No reset frame is sent when this
// happens.
QUIC_STREAM_CONNECTION_ERROR = 4,
// GoAway frame sent. No more stream can be created.
QUIC_STREAM_PEER_GOING_AWAY = 5,
// The stream has been cancelled.
QUIC_STREAM_CANCELLED = 6,
// Closing stream locally, sending a RST to allow for proper flow control
// accounting. Sent in response to a RST from the peer.
QUIC_RST_ACKNOWLEDGEMENT = 7,
// Receiver refused to create the stream (because its limit on open streams
// has been reached). The sender should retry the request later (using
// another stream).
QUIC_REFUSED_STREAM = 8,
// Invalid URL in PUSH_PROMISE request header.
QUIC_INVALID_PROMISE_URL = 9,
// Server is not authoritative for this URL.
QUIC_UNAUTHORIZED_PROMISE_URL = 10,
// Can't have more than one active PUSH_PROMISE per URL.
QUIC_DUPLICATE_PROMISE_URL = 11,
// Vary check failed.
QUIC_PROMISE_VARY_MISMATCH = 12,
// Only GET and HEAD methods allowed.
QUIC_INVALID_PROMISE_METHOD = 13,
// The push stream is unclaimed and timed out.
QUIC_PUSH_STREAM_TIMED_OUT = 14,
// Received headers were too large.
QUIC_HEADERS_TOO_LARGE = 15,
// The data is not likely arrive in time.
QUIC_STREAM_TTL_EXPIRED = 16,
// The stream received data that goes beyond its close offset.
QUIC_DATA_AFTER_CLOSE_OFFSET = 17,
// Peer violated protocol requirements in a way which does not match a more
// specific error code, or endpoint declines to use the more specific error
// code.
QUIC_STREAM_GENERAL_PROTOCOL_ERROR = 18,
// An internal error has occurred.
QUIC_STREAM_INTERNAL_ERROR = 19,
// Peer created a stream that will not be accepted.
QUIC_STREAM_STREAM_CREATION_ERROR = 20,
// A stream required by the connection was closed or reset.
QUIC_STREAM_CLOSED_CRITICAL_STREAM = 21,
// A frame was received which was not permitted in the current state or on the
// current stream.
QUIC_STREAM_FRAME_UNEXPECTED = 22,
// A frame that fails to satisfy layout requirements or with an invalid size
// was received.
QUIC_STREAM_FRAME_ERROR = 23,
// Peer exhibits a behavior that might be generating excessive load.
QUIC_STREAM_EXCESSIVE_LOAD = 24,
// A Stream ID or Push ID was used incorrectly, such as exceeding a limit,
// reducing a limit, or being reused.
QUIC_STREAM_ID_ERROR = 25,
// Error in the payload of a SETTINGS frame.
QUIC_STREAM_SETTINGS_ERROR = 26,
// No SETTINGS frame was received at the beginning of the control stream.
QUIC_STREAM_MISSING_SETTINGS = 27,
// A server rejected a request without performing any application processing.
QUIC_STREAM_REQUEST_REJECTED = 28,
// The client's stream terminated without containing a fully-formed request.
QUIC_STREAM_REQUEST_INCOMPLETE = 29,
// The connection established in response to a CONNECT request was reset or
// abnormally closed.
QUIC_STREAM_CONNECT_ERROR = 30,
// The requested operation cannot be served over HTTP/3.
// The peer should retry over HTTP/1.1.
QUIC_STREAM_VERSION_FALLBACK = 31,
// The QPACK decoder failed to interpret a header block and is not able to
// continue decoding that header block.
QUIC_STREAM_DECOMPRESSION_FAILED = 32,
// The QPACK decoder failed to interpret an encoder instruction received on
// the encoder stream.
QUIC_STREAM_ENCODER_STREAM_ERROR = 33,
// The QPACK encoder failed to interpret a decoder instruction received on the
// decoder stream.
QUIC_STREAM_DECODER_STREAM_ERROR = 34,
// IETF RESET_FRAME application error code not matching any HTTP/3 or QPACK
// error codes.
QUIC_STREAM_UNKNOWN_APPLICATION_ERROR_CODE = 35,
// No error. Used as bound while iterating.
QUIC_STREAM_LAST_ERROR = 36,
};
// QuicRstStreamErrorCode is encoded as a single octet on-the-wire.
static_assert(static_cast<int>(QUIC_STREAM_LAST_ERROR) <=
std::numeric_limits<uint8_t>::max(),
"QuicRstStreamErrorCode exceeds single octet");
// These values must remain stable as they are uploaded to UMA histograms.
// To add a new error code, use the current value of QUIC_LAST_ERROR and
// increment QUIC_LAST_ERROR.
enum QuicErrorCode {
QUIC_NO_ERROR = 0,
// Connection has reached an invalid state.
QUIC_INTERNAL_ERROR = 1,
// There were data frames after the a fin or reset.
QUIC_STREAM_DATA_AFTER_TERMINATION = 2,
// Control frame is malformed.
QUIC_INVALID_PACKET_HEADER = 3,
// Frame data is malformed.
QUIC_INVALID_FRAME_DATA = 4,
// The packet contained no payload.
QUIC_MISSING_PAYLOAD = 48,
// FEC data is malformed.
QUIC_INVALID_FEC_DATA = 5,
// STREAM frame data is malformed.
QUIC_INVALID_STREAM_DATA = 46,
// STREAM frame data overlaps with buffered data.
QUIC_OVERLAPPING_STREAM_DATA = 87,
// Received STREAM frame data is not encrypted.
QUIC_UNENCRYPTED_STREAM_DATA = 61,
// Attempt to send unencrypted STREAM frame.
QUIC_ATTEMPT_TO_SEND_UNENCRYPTED_STREAM_DATA = 88,
// Received a frame which is likely the result of memory corruption.
QUIC_MAYBE_CORRUPTED_MEMORY = 89,
// FEC frame data is not encrypted.
QUIC_UNENCRYPTED_FEC_DATA = 77,
// RST_STREAM frame data is malformed.
QUIC_INVALID_RST_STREAM_DATA = 6,
// CONNECTION_CLOSE frame data is malformed.
QUIC_INVALID_CONNECTION_CLOSE_DATA = 7,
// GOAWAY frame data is malformed.
QUIC_INVALID_GOAWAY_DATA = 8,
// WINDOW_UPDATE frame data is malformed.
QUIC_INVALID_WINDOW_UPDATE_DATA = 57,
// BLOCKED frame data is malformed.
QUIC_INVALID_BLOCKED_DATA = 58,
// STOP_WAITING frame data is malformed.
QUIC_INVALID_STOP_WAITING_DATA = 60,
// PATH_CLOSE frame data is malformed.
QUIC_INVALID_PATH_CLOSE_DATA = 78,
// ACK frame data is malformed.
QUIC_INVALID_ACK_DATA = 9,
// Message frame data is malformed.
QUIC_INVALID_MESSAGE_DATA = 112,
// Version negotiation packet is malformed.
QUIC_INVALID_VERSION_NEGOTIATION_PACKET = 10,
// Public RST packet is malformed.
QUIC_INVALID_PUBLIC_RST_PACKET = 11,
// There was an error decrypting.
QUIC_DECRYPTION_FAILURE = 12,
// There was an error encrypting.
QUIC_ENCRYPTION_FAILURE = 13,
// The packet exceeded kMaxOutgoingPacketSize.
QUIC_PACKET_TOO_LARGE = 14,
// The peer is going away. May be a client or server.
QUIC_PEER_GOING_AWAY = 16,
// A stream ID was invalid.
QUIC_INVALID_STREAM_ID = 17,
// A priority was invalid.
QUIC_INVALID_PRIORITY = 49,
// Too many streams already open.
QUIC_TOO_MANY_OPEN_STREAMS = 18,
// The peer created too many available streams.
QUIC_TOO_MANY_AVAILABLE_STREAMS = 76,
// Received public reset for this connection.
QUIC_PUBLIC_RESET = 19,
// Invalid protocol version.
QUIC_INVALID_VERSION = 20,
// The Header ID for a stream was too far from the previous.
QUIC_INVALID_HEADER_ID = 22,
// Negotiable parameter received during handshake had invalid value.
QUIC_INVALID_NEGOTIATED_VALUE = 23,
// There was an error decompressing data.
QUIC_DECOMPRESSION_FAILURE = 24,
// The connection timed out due to no network activity.
QUIC_NETWORK_IDLE_TIMEOUT = 25,
// The connection timed out waiting for the handshake to complete.
QUIC_HANDSHAKE_TIMEOUT = 67,
// There was an error encountered migrating addresses.
QUIC_ERROR_MIGRATING_ADDRESS = 26,
// There was an error encountered migrating port only.
QUIC_ERROR_MIGRATING_PORT = 86,
// There was an error while writing to the socket.
QUIC_PACKET_WRITE_ERROR = 27,
// There was an error while reading from the socket.
QUIC_PACKET_READ_ERROR = 51,
// We received a STREAM_FRAME with no data and no fin flag set.
QUIC_EMPTY_STREAM_FRAME_NO_FIN = 50,
// We received invalid data on the headers stream.
QUIC_INVALID_HEADERS_STREAM_DATA = 56,
// Invalid data on the headers stream received because of decompression
// failure.
QUIC_HEADERS_STREAM_DATA_DECOMPRESS_FAILURE = 97,
// The peer received too much data, violating flow control.
QUIC_FLOW_CONTROL_RECEIVED_TOO_MUCH_DATA = 59,
// The peer sent too much data, violating flow control.
QUIC_FLOW_CONTROL_SENT_TOO_MUCH_DATA = 63,
// The peer received an invalid flow control window.
QUIC_FLOW_CONTROL_INVALID_WINDOW = 64,
// The connection has been IP pooled into an existing connection.
QUIC_CONNECTION_IP_POOLED = 62,
// The connection has too many outstanding sent packets.
QUIC_TOO_MANY_OUTSTANDING_SENT_PACKETS = 68,
// The connection has too many outstanding received packets.
QUIC_TOO_MANY_OUTSTANDING_RECEIVED_PACKETS = 69,
// The quic connection has been cancelled.
QUIC_CONNECTION_CANCELLED = 70,
// Disabled QUIC because of high packet loss rate.
QUIC_BAD_PACKET_LOSS_RATE = 71,
// Disabled QUIC because of too many PUBLIC_RESETs post handshake.
QUIC_PUBLIC_RESETS_POST_HANDSHAKE = 73,
// Closed because we failed to serialize a packet.
QUIC_FAILED_TO_SERIALIZE_PACKET = 75,
// QUIC timed out after too many RTOs.
QUIC_TOO_MANY_RTOS = 85,
// Crypto errors.
// Handshake failed.
QUIC_HANDSHAKE_FAILED = 28,
// Handshake message contained out of order tags.
QUIC_CRYPTO_TAGS_OUT_OF_ORDER = 29,
// Handshake message contained too many entries.
QUIC_CRYPTO_TOO_MANY_ENTRIES = 30,
// Handshake message contained an invalid value length.
QUIC_CRYPTO_INVALID_VALUE_LENGTH = 31,
// A crypto message was received after the handshake was complete.
QUIC_CRYPTO_MESSAGE_AFTER_HANDSHAKE_COMPLETE = 32,
// A crypto message was received with an illegal message tag.
QUIC_INVALID_CRYPTO_MESSAGE_TYPE = 33,
// A crypto message was received with an illegal parameter.
QUIC_INVALID_CRYPTO_MESSAGE_PARAMETER = 34,
// An invalid channel id signature was supplied.
QUIC_INVALID_CHANNEL_ID_SIGNATURE = 52,
// A crypto message was received with a mandatory parameter missing.
QUIC_CRYPTO_MESSAGE_PARAMETER_NOT_FOUND = 35,
// A crypto message was received with a parameter that has no overlap
// with the local parameter.
QUIC_CRYPTO_MESSAGE_PARAMETER_NO_OVERLAP = 36,
// A crypto message was received that contained a parameter with too few
// values.
QUIC_CRYPTO_MESSAGE_INDEX_NOT_FOUND = 37,
// A demand for an unsupport proof type was received.
QUIC_UNSUPPORTED_PROOF_DEMAND = 94,
// An internal error occurred in crypto processing.
QUIC_CRYPTO_INTERNAL_ERROR = 38,
// A crypto handshake message specified an unsupported version.
QUIC_CRYPTO_VERSION_NOT_SUPPORTED = 39,
// (Deprecated) A crypto handshake message resulted in a stateless reject.
// QUIC_CRYPTO_HANDSHAKE_STATELESS_REJECT = 72,
// There was no intersection between the crypto primitives supported by the
// peer and ourselves.
QUIC_CRYPTO_NO_SUPPORT = 40,
// The server rejected our client hello messages too many times.
QUIC_CRYPTO_TOO_MANY_REJECTS = 41,
// The client rejected the server's certificate chain or signature.
QUIC_PROOF_INVALID = 42,
// A crypto message was received with a duplicate tag.
QUIC_CRYPTO_DUPLICATE_TAG = 43,
// A crypto message was received with the wrong encryption level (i.e. it
// should have been encrypted but was not.)
QUIC_CRYPTO_ENCRYPTION_LEVEL_INCORRECT = 44,
// The server config for a server has expired.
QUIC_CRYPTO_SERVER_CONFIG_EXPIRED = 45,
// We failed to setup the symmetric keys for a connection.
QUIC_CRYPTO_SYMMETRIC_KEY_SETUP_FAILED = 53,
// A handshake message arrived, but we are still validating the
// previous handshake message.
QUIC_CRYPTO_MESSAGE_WHILE_VALIDATING_CLIENT_HELLO = 54,
// A server config update arrived before the handshake is complete.
QUIC_CRYPTO_UPDATE_BEFORE_HANDSHAKE_COMPLETE = 65,
// CHLO cannot fit in one packet.
QUIC_CRYPTO_CHLO_TOO_LARGE = 90,
// This connection involved a version negotiation which appears to have been
// tampered with.
QUIC_VERSION_NEGOTIATION_MISMATCH = 55,
// Multipath errors.
// Multipath is not enabled, but a packet with multipath flag on is received.
QUIC_BAD_MULTIPATH_FLAG = 79,
// A path is supposed to exist but does not.
QUIC_MULTIPATH_PATH_DOES_NOT_EXIST = 91,
// A path is supposed to be active but is not.
QUIC_MULTIPATH_PATH_NOT_ACTIVE = 92,
// IP address changed causing connection close.
QUIC_IP_ADDRESS_CHANGED = 80,
// Connection migration errors.
// Network changed, but connection had no migratable streams.
QUIC_CONNECTION_MIGRATION_NO_MIGRATABLE_STREAMS = 81,
// Connection changed networks too many times.
QUIC_CONNECTION_MIGRATION_TOO_MANY_CHANGES = 82,
// Connection migration was attempted, but there was no new network to
// migrate to.
QUIC_CONNECTION_MIGRATION_NO_NEW_NETWORK = 83,
// Network changed, but connection had one or more non-migratable streams.
QUIC_CONNECTION_MIGRATION_NON_MIGRATABLE_STREAM = 84,
// Network changed, but connection migration was disabled by config.
QUIC_CONNECTION_MIGRATION_DISABLED_BY_CONFIG = 99,
// Network changed, but error was encountered on the alternative network.
QUIC_CONNECTION_MIGRATION_INTERNAL_ERROR = 100,
// Network changed, but handshake is not confirmed yet.
QUIC_CONNECTION_MIGRATION_HANDSHAKE_UNCONFIRMED = 111,
// Stream frames arrived too discontiguously so that stream sequencer buffer
// maintains too many intervals.
QUIC_TOO_MANY_STREAM_DATA_INTERVALS = 93,
// Sequencer buffer get into weird state where continuing read/write will lead
// to crash.
QUIC_STREAM_SEQUENCER_INVALID_STATE = 95,
// Connection closed because of server hits max number of sessions allowed.
QUIC_TOO_MANY_SESSIONS_ON_SERVER = 96,
// Receive a RST_STREAM with offset larger than kMaxStreamLength.
QUIC_STREAM_LENGTH_OVERFLOW = 98,
// Received a MAX DATA frame with errors.
QUIC_INVALID_MAX_DATA_FRAME_DATA = 102,
// Received a MAX STREAM DATA frame with errors.
QUIC_INVALID_MAX_STREAM_DATA_FRAME_DATA = 103,
// Received a MAX_STREAMS frame with bad data
QUIC_MAX_STREAMS_DATA = 104,
// Received a STREAMS_BLOCKED frame with bad data
QUIC_STREAMS_BLOCKED_DATA = 105,
// Error deframing a STREAM BLOCKED frame.
QUIC_INVALID_STREAM_BLOCKED_DATA = 106,
// NEW CONNECTION ID frame data is malformed.
QUIC_INVALID_NEW_CONNECTION_ID_DATA = 107,
// Received a MAX STREAM DATA frame with errors.
QUIC_INVALID_STOP_SENDING_FRAME_DATA = 108,
// Error deframing PATH CHALLENGE or PATH RESPONSE frames.
QUIC_INVALID_PATH_CHALLENGE_DATA = 109,
QUIC_INVALID_PATH_RESPONSE_DATA = 110,
// This is used to indicate an IETF QUIC PROTOCOL VIOLATION
// transport error within Google (pre-v99) QUIC.
IETF_QUIC_PROTOCOL_VIOLATION = 113,
QUIC_INVALID_NEW_TOKEN = 114,
// Received stream data on a WRITE_UNIDIRECTIONAL stream.
QUIC_DATA_RECEIVED_ON_WRITE_UNIDIRECTIONAL_STREAM = 115,
// Try to send stream data on a READ_UNIDIRECTIONAL stream.
QUIC_TRY_TO_WRITE_DATA_ON_READ_UNIDIRECTIONAL_STREAM = 116,
// RETIRE CONNECTION ID frame data is malformed.
QUIC_INVALID_RETIRE_CONNECTION_ID_DATA = 117,
// Error in a received STREAMS BLOCKED frame.
QUIC_STREAMS_BLOCKED_ERROR = 118,
// Error in a received MAX STREAMS frame
QUIC_MAX_STREAMS_ERROR = 119,
// Error in Http decoder
QUIC_HTTP_DECODER_ERROR = 120,
// Connection from stale host needs to be cancelled.
QUIC_STALE_CONNECTION_CANCELLED = 121,
// A pseudo error, used as an extended error reason code in the error_details
// of IETF-QUIC CONNECTION_CLOSE frames. It is used in
// OnConnectionClosed upcalls to indicate that extended error information was
// not available in a received CONNECTION_CLOSE frame.
QUIC_IETF_GQUIC_ERROR_MISSING = 122,
// Received WindowUpdate on a READ_UNIDIRECTIONAL stream.
QUIC_WINDOW_UPDATE_RECEIVED_ON_READ_UNIDIRECTIONAL_STREAM = 123,
// There are too many buffered control frames in control frame manager.
QUIC_TOO_MANY_BUFFERED_CONTROL_FRAMES = 124,
// QuicTransport received invalid client indication.
QUIC_TRANSPORT_INVALID_CLIENT_INDICATION = 125,
// Internal error codes for QPACK errors.
QUIC_QPACK_DECOMPRESSION_FAILED = 126,
// Obsolete generic QPACK encoder and decoder stream error codes.
// (Obsoleted by gfe2_reloadable_flag_quic_granular_qpack_error_codes.)
QUIC_QPACK_ENCODER_STREAM_ERROR = 127,
QUIC_QPACK_DECODER_STREAM_ERROR = 128,
// QPACK encoder stream errors.
// Variable integer exceeding 2^64-1 received.
QUIC_QPACK_ENCODER_STREAM_INTEGER_TOO_LARGE = 174,
// String literal exceeding kStringLiteralLengthLimit in length received.
QUIC_QPACK_ENCODER_STREAM_STRING_LITERAL_TOO_LONG = 175,
// String literal with invalid Huffman encoding received.
QUIC_QPACK_ENCODER_STREAM_HUFFMAN_ENCODING_ERROR = 176,
// Invalid static table index in Insert With Name Reference instruction.
QUIC_QPACK_ENCODER_STREAM_INVALID_STATIC_ENTRY = 177,
// Error inserting entry with static name reference in Insert With Name
// Reference instruction due to entry size exceeding dynamic table capacity.
QUIC_QPACK_ENCODER_STREAM_ERROR_INSERTING_STATIC = 178,
// Invalid relative index in Insert With Name Reference instruction.
QUIC_QPACK_ENCODER_STREAM_INSERTION_INVALID_RELATIVE_INDEX = 179,
// Dynamic entry not found in Insert With Name Reference instruction.
QUIC_QPACK_ENCODER_STREAM_INSERTION_DYNAMIC_ENTRY_NOT_FOUND = 180,
// Error inserting entry with dynamic name reference in Insert With Name
// Reference instruction due to entry size exceeding dynamic table capacity.
QUIC_QPACK_ENCODER_STREAM_ERROR_INSERTING_DYNAMIC = 181,
// Error inserting entry in Insert With Literal Name instruction due to entry
// size exceeding dynamic table capacity.
QUIC_QPACK_ENCODER_STREAM_ERROR_INSERTING_LITERAL = 182,
// Invalid relative index in Duplicate instruction.
QUIC_QPACK_ENCODER_STREAM_DUPLICATE_INVALID_RELATIVE_INDEX = 183,
// Dynamic entry not found in Duplicate instruction.
QUIC_QPACK_ENCODER_STREAM_DUPLICATE_DYNAMIC_ENTRY_NOT_FOUND = 184,
// Error in Set Dynamic Table Capacity instruction due to new capacity
// exceeding maximum dynamic table capacity.
QUIC_QPACK_ENCODER_STREAM_SET_DYNAMIC_TABLE_CAPACITY = 185,
// QPACK decoder stream errors.
// Variable integer exceeding 2^64-1 received.
QUIC_QPACK_DECODER_STREAM_INTEGER_TOO_LARGE = 186,
// Insert Count Increment instruction received with invalid 0 increment.
QUIC_QPACK_DECODER_STREAM_INVALID_ZERO_INCREMENT = 187,
// Insert Count Increment instruction causes uint64_t overflow.
QUIC_QPACK_DECODER_STREAM_INCREMENT_OVERFLOW = 188,
// Insert Count Increment instruction increases Known Received Count beyond
// inserted entry cound.
QUIC_QPACK_DECODER_STREAM_IMPOSSIBLE_INSERT_COUNT = 189,
// Header Acknowledgement received for stream that has no outstanding header
// blocks.
QUIC_QPACK_DECODER_STREAM_INCORRECT_ACKNOWLEDGEMENT = 190,
// Received stream data beyond close offset.
QUIC_STREAM_DATA_BEYOND_CLOSE_OFFSET = 129,
// Received multiple close offset.
QUIC_STREAM_MULTIPLE_OFFSET = 130,
// Internal error codes for HTTP/3 errors.
QUIC_HTTP_FRAME_TOO_LARGE = 131,
QUIC_HTTP_FRAME_ERROR = 132,
// A frame that is never allowed on a request stream is received.
QUIC_HTTP_FRAME_UNEXPECTED_ON_SPDY_STREAM = 133,
// A frame that is never allowed on the control stream is received.
QUIC_HTTP_FRAME_UNEXPECTED_ON_CONTROL_STREAM = 134,
// An invalid sequence of frames normally allowed on a request stream is
// received.
QUIC_HTTP_INVALID_FRAME_SEQUENCE_ON_SPDY_STREAM = 151,
// A second SETTINGS frame is received on the control stream.
QUIC_HTTP_INVALID_FRAME_SEQUENCE_ON_CONTROL_STREAM = 152,
// A second instance of a unidirectional stream of a certain type is created.
QUIC_HTTP_DUPLICATE_UNIDIRECTIONAL_STREAM = 153,
// Client receives a server-initiated bidirectional stream.
QUIC_HTTP_SERVER_INITIATED_BIDIRECTIONAL_STREAM = 154,
// Server opens stream with stream ID corresponding to client-initiated
// stream or vice versa.
QUIC_HTTP_STREAM_WRONG_DIRECTION = 155,
// Peer closes one of the six critical unidirectional streams (control, QPACK
// encoder or decoder, in either direction).
QUIC_HTTP_CLOSED_CRITICAL_STREAM = 156,
// The first frame received on the control stream is not a SETTINGS frame.
QUIC_HTTP_MISSING_SETTINGS_FRAME = 157,
// The received SETTINGS frame contains duplicate setting identifiers.
QUIC_HTTP_DUPLICATE_SETTING_IDENTIFIER = 158,
// MAX_PUSH_ID frame received with push ID value smaller than a previously
// received value.
QUIC_HTTP_INVALID_MAX_PUSH_ID = 159,
// Received unidirectional stream limit is lower than required by HTTP/3.
QUIC_HTTP_STREAM_LIMIT_TOO_LOW = 160,
// Received mismatched SETTINGS frame from HTTP/3 connection where early data
// is accepted. Server violated the HTTP/3 spec.
QUIC_HTTP_ZERO_RTT_RESUMPTION_SETTINGS_MISMATCH = 164,
// Received mismatched SETTINGS frame from HTTP/3 connection where early data
// is rejected. Our implementation currently doesn't support it.
QUIC_HTTP_ZERO_RTT_REJECTION_SETTINGS_MISMATCH = 165,
// Client received GOAWAY frame with stream ID that is not for a
// client-initiated bidirectional stream.
QUIC_HTTP_GOAWAY_INVALID_STREAM_ID = 166,
// Received GOAWAY frame with ID that is greater than previously received ID.
QUIC_HTTP_GOAWAY_ID_LARGER_THAN_PREVIOUS = 167,
// HTTP/3 session received SETTINGS frame which contains HTTP/2 specific
// settings.
QUIC_HTTP_RECEIVE_SPDY_SETTING = 169,
// HTTP/3 session received an HTTP/2 only frame.
QUIC_HTTP_RECEIVE_SPDY_FRAME = 171,
// HPACK header block decoding errors.
// Index varint beyond implementation limit.
QUIC_HPACK_INDEX_VARINT_ERROR = 135,
// Name length varint beyond implementation limit.
QUIC_HPACK_NAME_LENGTH_VARINT_ERROR = 136,
// Value length varint beyond implementation limit.
QUIC_HPACK_VALUE_LENGTH_VARINT_ERROR = 137,
// Name length exceeds buffer limit.
QUIC_HPACK_NAME_TOO_LONG = 138,
// Value length exceeds buffer limit.
QUIC_HPACK_VALUE_TOO_LONG = 139,
// Name Huffman encoding error.
QUIC_HPACK_NAME_HUFFMAN_ERROR = 140,
// Value Huffman encoding error.
QUIC_HPACK_VALUE_HUFFMAN_ERROR = 141,
// Next instruction should have been a dynamic table size update.
QUIC_HPACK_MISSING_DYNAMIC_TABLE_SIZE_UPDATE = 142,
// Invalid index in indexed header field representation.
QUIC_HPACK_INVALID_INDEX = 143,
// Invalid index in literal header field with indexed name representation.
QUIC_HPACK_INVALID_NAME_INDEX = 144,
// Dynamic table size update not allowed.
QUIC_HPACK_DYNAMIC_TABLE_SIZE_UPDATE_NOT_ALLOWED = 145,
// Initial dynamic table size update is above low water mark.
QUIC_HPACK_INITIAL_TABLE_SIZE_UPDATE_IS_ABOVE_LOW_WATER_MARK = 146,
// Dynamic table size update is above acknowledged setting.
QUIC_HPACK_TABLE_SIZE_UPDATE_IS_ABOVE_ACKNOWLEDGED_SETTING = 147,
// HPACK block ends in the middle of an instruction.
QUIC_HPACK_TRUNCATED_BLOCK = 148,
// Incoming data fragment exceeds buffer limit.
QUIC_HPACK_FRAGMENT_TOO_LONG = 149,
// Total compressed HPACK data size exceeds limit.
QUIC_HPACK_COMPRESSED_HEADER_SIZE_EXCEEDS_LIMIT = 150,
// Stream/flow control limit from 1-RTT handshake is too low to retransmit
// 0-RTT data. This is our implentation error. We could in theory keep the
// connection alive but chose not to for simplicity.
QUIC_ZERO_RTT_UNRETRANSMITTABLE = 161,
// Stream/flow control limit from 0-RTT rejection reduces cached limit.
// This is our implentation error. We could in theory keep the connection
// alive but chose not to for simplicity.
QUIC_ZERO_RTT_REJECTION_LIMIT_REDUCED = 162,
// Stream/flow control limit from 0-RTT resumption reduces cached limit.
// This is the peer violating QUIC spec.
QUIC_ZERO_RTT_RESUMPTION_LIMIT_REDUCED = 163,
// The connection silently timed out due to no network activity.
QUIC_SILENT_IDLE_TIMEOUT = 168,
// Try to write data without the right write keys.
QUIC_MISSING_WRITE_KEYS = 170,
// An endpoint detected errors in performing key updates.
QUIC_KEY_UPDATE_ERROR = 172,
// An endpoint has reached the confidentiality or integrity limit for the
// AEAD algorithm used by the given connection.
QUIC_AEAD_LIMIT_REACHED = 173,
// Connection reached maximum age (regardless of activity), no new requests
// are accepted. This error code is sent in transport layer GOAWAY frame when
// using gQUIC, and only used internally when using HTTP/3. Active requests
// are still served, after which connection will be closed due to idle
// timeout.
QUIC_MAX_AGE_TIMEOUT = 191,
// Decrypted a 0-RTT packet with a higher packet number than a 1-RTT packet.
QUIC_INVALID_0RTT_PACKET_NUMBER_OUT_OF_ORDER = 192,
// No error. Used as bound while iterating.
QUIC_LAST_ERROR = 193,
};
// QuicErrorCodes is encoded as four octets on-the-wire when doing Google QUIC,
// or a varint62 when doing IETF QUIC. Ensure that its value does not exceed
// the smaller of the two limits.
static_assert(static_cast<uint64_t>(QUIC_LAST_ERROR) <=
static_cast<uint64_t>(std::numeric_limits<uint32_t>::max()),
"QuicErrorCode exceeds four octets");
// Returns the name of the QuicRstStreamErrorCode as a char*
QUIC_EXPORT_PRIVATE const char* QuicRstStreamErrorCodeToString(
QuicRstStreamErrorCode error);
// Returns the name of the QuicErrorCode as a char*
QUIC_EXPORT_PRIVATE const char* QuicErrorCodeToString(QuicErrorCode error);
// Wire values for QUIC transport errors.
// https://quicwg.org/base-drafts/draft-ietf-quic-transport.html#name-transport-error-codes
enum QuicIetfTransportErrorCodes : uint64_t {
NO_IETF_QUIC_ERROR = 0x0,
INTERNAL_ERROR = 0x1,
SERVER_BUSY_ERROR = 0x2,
FLOW_CONTROL_ERROR = 0x3,
STREAM_LIMIT_ERROR = 0x4,
STREAM_STATE_ERROR = 0x5,
FINAL_SIZE_ERROR = 0x6,
FRAME_ENCODING_ERROR = 0x7,
TRANSPORT_PARAMETER_ERROR = 0x8,
CONNECTION_ID_LIMIT_ERROR = 0x9,
PROTOCOL_VIOLATION = 0xA,
INVALID_TOKEN = 0xB,
CRYPTO_BUFFER_EXCEEDED = 0xD,
KEY_UPDATE_ERROR = 0xE,
AEAD_LIMIT_REACHED = 0xF,
CRYPTO_ERROR_FIRST = 0x100,
CRYPTO_ERROR_LAST = 0x1FF,
};
QUIC_EXPORT_PRIVATE std::string QuicIetfTransportErrorCodeString(
QuicIetfTransportErrorCodes c);
QUIC_EXPORT_PRIVATE std::ostream& operator<<(
std::ostream& os,
const QuicIetfTransportErrorCodes& c);
// A transport error code (if is_transport_close is true) or application error
// code (if is_transport_close is false) to be used in CONNECTION_CLOSE frames.
struct QUIC_EXPORT_PRIVATE QuicErrorCodeToIetfMapping {
bool is_transport_close;
uint64_t error_code;
};
// Convert QuicErrorCode to transport or application IETF error code
// to be used in CONNECTION_CLOSE frames.
QUIC_EXPORT_PRIVATE QuicErrorCodeToIetfMapping
QuicErrorCodeToTransportErrorCode(QuicErrorCode error);
// Wire values for HTTP/3 errors.
// https://quicwg.org/base-drafts/draft-ietf-quic-http.html#http-error-codes
enum class QuicHttp3ErrorCode {
// NO_ERROR is defined as a C preprocessor macro on Windows.
HTTP3_NO_ERROR = 0x100,
GENERAL_PROTOCOL_ERROR = 0x101,
INTERNAL_ERROR = 0x102,
STREAM_CREATION_ERROR = 0x103,
CLOSED_CRITICAL_STREAM = 0x104,
FRAME_UNEXPECTED = 0x105,
FRAME_ERROR = 0x106,
EXCESSIVE_LOAD = 0x107,
ID_ERROR = 0x108,
SETTINGS_ERROR = 0x109,
MISSING_SETTINGS = 0x10A,
REQUEST_REJECTED = 0x10B,
REQUEST_CANCELLED = 0x10C,
REQUEST_INCOMPLETE = 0x10D,
CONNECT_ERROR = 0x10F,
VERSION_FALLBACK = 0x110,
};
// Wire values for QPACK errors.
// https://quicwg.org/base-drafts/draft-ietf-quic-qpack.html#error-code-registration
enum class QuicHttpQpackErrorCode {
DECOMPRESSION_FAILED = 0x200,
ENCODER_STREAM_ERROR = 0x201,
DECODER_STREAM_ERROR = 0x202
};
// Convert a QuicRstStreamErrorCode to an application error code to be used in
// an IETF QUIC RESET_STREAM frame
QUIC_EXPORT_PRIVATE uint64_t RstStreamErrorCodeToIetfResetStreamErrorCode(
QuicRstStreamErrorCode rst_stream_error_code);
// Convert the application error code of an IETF QUIC RESET_STREAM frame
// to QuicRstStreamErrorCode.
QUIC_EXPORT_PRIVATE QuicRstStreamErrorCode
IetfResetStreamErrorCodeToRstStreamErrorCode(uint64_t ietf_error_code);
QUIC_EXPORT_PRIVATE inline std::string HistogramEnumString(
QuicErrorCode enum_value) {
return QuicErrorCodeToString(enum_value);
}
QUIC_EXPORT_PRIVATE inline std::string HistogramEnumDescription(
QuicErrorCode /*dummy*/) {
return "cause";
}
} // namespace quic
#endif // QUICHE_QUIC_CORE_QUIC_ERROR_CODES_H_