blob: 50d9987b811eda1d6eaeb3227d45a39b9509a3f6 [file] [log] [blame]
// Copyright 2016 The Chromium Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.
// Supports testing by converting callbacks to SpdyFramerVisitorInterface into
// callbacks to SpdyDeframerVisitorInterface, whose arguments are generally
// SpdyFrameIR instances. This enables a test client or test backend to operate
// at a level between the low-level callbacks of SpdyFramerVisitorInterface and
// the much higher level of entire messages (i.e. headers, body, trailers).
// Where possible the converter (SpdyTestDeframer) tries to preserve information
// that might be useful to tests (e.g. the order of headers or the amount of
// padding); the design also aims to allow tests to be concise, ideally
// supporting gMock style EXPECT_CALL(visitor, OnHeaders(...matchers...))
// without too much boilerplate.
// Only supports HTTP/2 for the moment.
// Example of usage:
// SpdyFramer framer(HTTP2);
// // Need to call SpdyTestDeframer::AtFrameEnd() after processing each
// // frame, so tell SpdyFramer to stop after each.
// framer.set_process_single_input_frame(true);
// // Need the new OnHeader callbacks.
// framer.set_use_new_methods_for_test(true);
// // Create your visitor, a subclass of SpdyDeframerVisitorInterface.
// // For example, using DeframerCallbackCollector to collect frames:
// std::vector<CollectedFrame> collected_frames;
// auto your_visitor = SpdyMakeUnique<DeframerCallbackCollector>(
// &collected_frames);
// // Transfer ownership of your visitor to the converter, which ensures that
// // your visitor stays alive while the converter needs to call it.
// auto the_deframer = SpdyTestDeframer::CreateConverter(
// std::move(your_visitor));
// // Tell the framer to notify SpdyTestDeframer of the decoded frame
// // details.
// framer.set_visitor(the_deframer.get());
// // Process frames.
// SpdyStringPiece input = ...
// while (!input.empty() && !framer.HasError()) {
// size_t consumed = framer.ProcessInput(, input.size());
// input.remove_prefix(consumed);
// if (framer.state() == SpdyFramer::SPDY_READY_FOR_FRAME) {
// the_deframer->AtFrameEnd();
// }
// }
// // Make sure that the correct frames were received. For example:
// ASSERT_EQ(collected_frames.size(), 3);
// SpdyDataIR expected1(7 /*stream_id*/, "Data Payload");
// expected1.set_padding_len(17);
// EXPECT_TRUE(collected_frames[0].VerifyEquals(expected1));
// // Repeat for the other frames.
// Note that you could also seed the subclass of SpdyDeframerVisitorInterface
// with the expected frames, which it would pop-off the list as its expectations
// are met.
#include <cstdint>
#include <memory>
#include <type_traits>
#include <utility>
#include <vector>
#include "base/logging.h"
#include "base/macros.h"
#include "testing/gtest/include/gtest/gtest.h"
#include "net/third_party/quiche/src/spdy/core/http2_frame_decoder_adapter.h"
#include "net/third_party/quiche/src/spdy/core/spdy_protocol.h"
#include "net/third_party/quiche/src/spdy/core/spdy_protocol_test_utils.h"
#include "net/third_party/quiche/src/spdy/core/spdy_test_utils.h"
#include "net/third_party/quiche/src/spdy/platform/api/spdy_string.h"
namespace spdy {
namespace test {
// Non-lossy representation of a SETTINGS frame payload.
typedef std::vector<std::pair<SpdyKnownSettingsId, uint32_t>> SettingVector;
// StringPairVector is used to record information lost by SpdyHeaderBlock, in
// particular the order of each header entry, though it doesn't expose the
// inner details of the HPACK block, such as the type of encoding selected
// for each header entry, nor dynamic table size changes.
typedef std::pair<SpdyString, SpdyString> StringPair;
typedef std::vector<StringPair> StringPairVector;
// Forward decl.
class SpdyTestDeframer;
// Note that this only roughly captures the frames, as padding bytes are lost,
// continuation frames are combined with their leading HEADERS or PUSH_PROMISE,
// the details of the HPACK encoding are lost, leaving
// only the list of header entries (name and value strings). If really helpful,
// we could add a SpdyRawDeframerVisitorInterface that gets the HPACK bytes,
// and receives continuation frames. For more info we'd need to improve
// SpdyFramerVisitorInterface.
class SpdyDeframerVisitorInterface {
virtual ~SpdyDeframerVisitorInterface() {}
// Wrap a visitor in another SpdyDeframerVisitorInterface that will
// DVLOG each call, and will then forward the calls to the wrapped visitor
// (if provided; nullptr is OK). Takes ownership of the wrapped visitor.
static std::unique_ptr<SpdyDeframerVisitorInterface> LogBeforeVisiting(
std::unique_ptr<SpdyDeframerVisitorInterface> wrapped_visitor);
virtual void OnAltSvc(std::unique_ptr<SpdyAltSvcIR> frame) {}
virtual void OnData(std::unique_ptr<SpdyDataIR> frame) {}
virtual void OnGoAway(std::unique_ptr<SpdyGoAwayIR> frame) {}
// SpdyHeadersIR and SpdyPushPromiseIR each has a SpdyHeaderBlock which
// significantly modifies the headers, so the actual header entries (name
// and value strings) are provided in a vector.
virtual void OnHeaders(std::unique_ptr<SpdyHeadersIR> frame,
std::unique_ptr<StringPairVector> headers) {}
virtual void OnPing(std::unique_ptr<SpdyPingIR> frame) {}
virtual void OnPingAck(std::unique_ptr<SpdyPingIR> frame);
virtual void OnPriority(std::unique_ptr<SpdyPriorityIR> frame) {}
// SpdyHeadersIR and SpdyPushPromiseIR each has a SpdyHeaderBlock which
// significantly modifies the headers, so the actual header entries (name
// and value strings) are provided in a vector.
virtual void OnPushPromise(std::unique_ptr<SpdyPushPromiseIR> frame,
std::unique_ptr<StringPairVector> headers) {}
virtual void OnRstStream(std::unique_ptr<SpdyRstStreamIR> frame) {}
// SpdySettingsIR has a map for settings, so loses info about the order of
// settings, and whether the same setting appeared more than once, so the
// the actual settings (parameter and value) are provided in a vector.
virtual void OnSettings(std::unique_ptr<SpdySettingsIR> frame,
std::unique_ptr<SettingVector> settings) {}
// A settings frame with an ACK has no content, but for uniformity passing
// a frame with the ACK flag set.
virtual void OnSettingsAck(std::unique_ptr<SpdySettingsIR> frame);
virtual void OnWindowUpdate(std::unique_ptr<SpdyWindowUpdateIR> frame) {}
// The SpdyFramer will not process any more data at this point.
virtual void OnError(http2::Http2DecoderAdapter::SpdyFramerError error,
SpdyTestDeframer* deframer) {}
class SpdyTestDeframer : public SpdyFramerVisitorInterface {
~SpdyTestDeframer() override {}
// Creates a SpdyFramerVisitorInterface that builds SpdyFrameIR concrete
// instances based on the callbacks it receives; when an entire frame is
// decoded/reconstructed it calls the passed in SpdyDeframerVisitorInterface.
// Transfers ownership of visitor to the new SpdyTestDeframer, which ensures
// that it continues to exist while the SpdyTestDeframer exists.
static std::unique_ptr<SpdyTestDeframer> CreateConverter(
std::unique_ptr<SpdyDeframerVisitorInterface> visitor);
// Call to notify the deframer that the SpdyFramer has returned after reaching
// the end of decoding a frame. This is used to flush info about some frame
// types where we don't get a clear end signal; others are flushed (i.e. the
// appropriate call to the SpdyDeframerVisitorInterface method is invoked)
// as they're decoded by SpdyFramer and it calls the deframer. See the
// example in the comments at the top of this file.
virtual bool AtFrameEnd() = 0;
SpdyTestDeframer() {}
SpdyTestDeframer(const SpdyTestDeframer&) = delete;
SpdyTestDeframer& operator=(const SpdyTestDeframer&) = delete;
// CollectedFrame holds the result of one call to SpdyDeframerVisitorInterface,
// as recorded by DeframerCallbackCollector.
struct CollectedFrame {
CollectedFrame(CollectedFrame&& other);
CollectedFrame& operator=(CollectedFrame&& other);
// Compare a SpdyFrameIR sub-class instance, expected_ir, against the
// collected SpdyFrameIR.
template <class T,
typename X =
typename std::enable_if<std::is_base_of<SpdyFrameIR, T>::value>>
::testing::AssertionResult VerifyHasFrame(const T& expected_ir) const {
return VerifySpdyFrameIREquals(expected_ir, frame_ir.get());
// Compare the collected headers against a StringPairVector. Ignores
// this->frame_ir.
::testing::AssertionResult VerifyHasHeaders(
const StringPairVector& expected_headers) const;
// Compare the collected settings (parameter and value pairs) against
// expected_settings. Ignores this->frame_ir.
::testing::AssertionResult VerifyHasSettings(
const SettingVector& expected_settings) const;
std::unique_ptr<SpdyFrameIR> frame_ir;
std::unique_ptr<StringPairVector> headers;
std::unique_ptr<SettingVector> settings;
bool error_reported = false;
// Creates a CollectedFrame instance for each callback, storing it in the
// vector provided to the constructor.
class DeframerCallbackCollector : public SpdyDeframerVisitorInterface {
explicit DeframerCallbackCollector(
std::vector<CollectedFrame>* collected_frames);
~DeframerCallbackCollector() override {}
void OnAltSvc(std::unique_ptr<SpdyAltSvcIR> frame_ir) override;
void OnData(std::unique_ptr<SpdyDataIR> frame_ir) override;
void OnGoAway(std::unique_ptr<SpdyGoAwayIR> frame_ir) override;
void OnHeaders(std::unique_ptr<SpdyHeadersIR> frame_ir,
std::unique_ptr<StringPairVector> headers) override;
void OnPing(std::unique_ptr<SpdyPingIR> frame_ir) override;
void OnPingAck(std::unique_ptr<SpdyPingIR> frame_ir) override;
void OnPriority(std::unique_ptr<SpdyPriorityIR> frame_ir) override;
void OnPushPromise(std::unique_ptr<SpdyPushPromiseIR> frame_ir,
std::unique_ptr<StringPairVector> headers) override;
void OnRstStream(std::unique_ptr<SpdyRstStreamIR> frame_ir) override;
void OnSettings(std::unique_ptr<SpdySettingsIR> frame_ir,
std::unique_ptr<SettingVector> settings) override;
void OnSettingsAck(std::unique_ptr<SpdySettingsIR> frame_ir) override;
void OnWindowUpdate(std::unique_ptr<SpdyWindowUpdateIR> frame_ir) override;
void OnError(http2::Http2DecoderAdapter::SpdyFramerError error,
SpdyTestDeframer* deframer) override;
std::vector<CollectedFrame>* collected_frames_;
} // namespace test
} // namespace spdy